设为首页收藏本站
切换到窄版

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
深圳中科云信息技术有限公司»论坛 › 中科云-CTCI › 龙芯2K3000系列 › 中科云3B6000M小主机前置USB-C口连接触摸屏当副屏指北 ...
返回列表 发新帖
查看: 178|回复: 3

中科云3B6000M小主机前置USB-C口连接触摸屏当副屏指北

[复制链接]
杜比

27

主题

66

回帖

467

积分

超级版主

积分
467
发表于 2025-12-30 10:35:04 | 显示全部楼层 |阅读模式
本帖最后由 杜比 于 2025-12-30 11:41 编辑

NUC前置C口，是个多功能口，除了连接usb设备，还支持“一线通”的功能，这得益于龙芯3B6000M处理器提供了USB3.1的满功能支持。

所谓“一线通”，实际上利用的是USB3.1 Type-C 传输视频，核心原理是 ‌USB 3.1 的 DisplayPort Alt 模式‌，它通过复用接口的差分信号线来实现视频、音频和数据的同步传输。

更详细的说，利用4对 TX/RX 差分线中的 2 对传输 DP 信号，剩余 2 对用于 USB3.1 数据传输，实现同时传输视频、音频以及usb接口的触摸功能。

中科云 3B6000M NUC 对该功能，进行了全面支持！

通过实际的测试，它的实现大致包含以下细节：

1、3B6000M有两个DC通道，适配HDMI、DP和EDP三种连接器，一线通连接的是HDMI这个通道。

2、当使用NUC的DP连接显示器，TypeC口连接触摸屏时，系统开启两个DC通道，提供屏幕克隆和扩展两种模式

3、当使用NUC的HDMI连接显示器，TypeC口连接触摸屏时，实际上使用的是一个DC通道，不推荐这么用。

4、触摸屏在2、3两种连接模式下，都可以使用。

推荐使用双DC通道模式，NUC预装的Loongnix20.7提供了驱动支持，诚鸿的开鸿社区OS系统，实测还未提供相关驱动支持




本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有账号？立即注册

×
回复

举报

杜比

27

主题

66

回帖

467

积分

超级版主

积分
467
 楼主| 发表于 2025-12-30 10:36:09 | 显示全部楼层
  1. [    0.000000] Linux version 4.19.0-19-loongson-3 (abuild@10.40.40.162) (gcc version 8.3.0 (Loongnix 8.3.0-6.lnd.vec.44)) #1 SMP 4.19.190.8.26 Wed Oct 15 02:40:20 UTC 2025
  2. [    0.000000] 64-bit Loongson Processor probed (LA364 Core)
  3. [    0.000000] CPU0 revision is: 0014b020 (Loongson-64bit)
  4. [    0.000000] FPU0 revision is: 00000001
  5. [    0.000000] efi:  ACPI 2.0=0xf9bef000  SMBIOS=0xfdec0000  SMBIOS 3.0=0xfdea0000  LA SCREENINFO=0xfdf2fa98  SCREENINFO=0xfdf2fa98  INITRD=0xf9bed000  NEWMEM=0xf9bec000
  6. [    0.000000] ACPI: Early table checksum verification disabled
  7. [    0.000000] ACPI: RSDP 0x00000000F9BEF000 000024 (v02 LOONGS)
  8. [    0.000000] ACPI: XSDT 0x00000000F9BEE000 000064 (v01 LOONGS LOONGSON 00000002      01000013)
  9. [    0.000000] ACPI: FACP 0x00000000F9BC0000 0000F4 (v03 LOONGS LOONGSON 00000002 LIUX 01000013)
  10. [    0.000000] ACPI: DSDT 0x00000000F9B40000 0026E3 (v02 LOONGS LOONGSON 00000002 INTL 20240827)
  11. [    0.000000] ACPI: FACS 0x00000000F9BB0000 000040
  12. [    0.000000] ACPI: APIC 0x00000000F9BD0000 0000FA (v06 LOONGS LOONGSON 00000002 LIUX 01000013)
  13. [    0.000000] ACPI: MCFG 0x00000000F9BA0000 00003C (v01 LOONGS LOONGSON 00000001 LIUX 01000013)
  14. [    0.000000] ACPI: IVRS 0x00000000F9B90000 000050 (v01 LARCH  LOONGSON 00000001 LIUX 00000001)
  15. [    0.000000] ACPI: SRAT 0x00000000F9B80000 000100 (v02 LOONGS LOONGSON 00000002 LIUX 01000013)
  16. [    0.000000] ACPI: SLIT 0x00000000F9B70000 00002D (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
  17. [    0.000000] ACPI: VIAT 0x00000000F9B60000 00002C (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
  18. [    0.000000] ACPI: PPTT 0x00000000F9B50000 000164 (v03 LOONGS LOONGSON 00000002 LIUX 01000013)
  19. [    0.000000] SRAT: PXM 0 -> CPU 0x00 -> Node 0
  20. [    0.000000] SRAT: PXM 0 -> CPU 0x01 -> Node 0
  21. [    0.000000] SRAT: PXM 0 -> CPU 0x02 -> Node 0
  22. [    0.000000] SRAT: PXM 0 -> CPU 0x03 -> Node 0
  23. [    0.000000] SRAT: PXM 0 -> CPU 0x04 -> Node 0
  24. [    0.000000] SRAT: PXM 0 -> CPU 0x05 -> Node 0
  25. [    0.000000] SRAT: PXM 0 -> CPU 0x06 -> Node 0
  26. [    0.000000] SRAT: PXM 0 -> CPU 0x07 -> Node 0
  27. [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0fffffff]
  28. [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x90000000-0x43fffffff]
  29. [    0.000000] Node0's addrspace_offset is 0x0
  30. [    0.000000] Node0: start_pfn=0x80, end_pfn=0x110000
  31. [    0.000000] SMBIOS 3.2.0 present.
  32. [    0.000000] DMI: Loongson Loongson-3B6000M-EVB/EVB, BIOS UDK_3B6000M_NUC_V0.41_1013A 10/14/25 09:23:49
  33. [    0.000000] CpuClock = 2500000000
  34. [    0.000000] The BIOS Version: UDK_3B6000M_NUC_V0.41_1013A
  35. [    0.000000] software IO TLB: mapped [mem 0x02028000-0x06028000] (64MB)
  36. [    0.000000] PM: Registered nosave memory: [mem 0x010a8000-0x010abfff]
  37. [    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
  38. [    0.000000] Zone ranges:
  39. [    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
  40. [    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fffffff]
  41. [    0.000000] Movable zone start for each node
  42. [    0.000000] Early memory node ranges
  43. [    0.000000]   node   0: [mem 0x0000000000200000-0x000000000edfffff]
  44. [    0.000000]   node   0: [mem 0x0000000090100000-0x00000000f9b3ffff]
  45. [    0.000000]   node   0: [mem 0x00000000f9be0000-0x00000000f9bebfff]
  46. [    0.000000]   node   0: [mem 0x00000000f9bf0000-0x00000000fdaeffff]
  47. [    0.000000]   node   0: [mem 0x00000000fe0b0000-0x000000043fffffff]
  48. [    0.000000] Zeroed struct page in unavailable ranges: 1753 pages
  49. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000043fffffff]
  50. [    0.000000] On node 0 totalpages: 981287
  51. [    0.000000]   DMA32 zone: 506 pages used for memmap
  52. [    0.000000]   DMA32 zone: 0 pages reserved
  53. [    0.000000]   DMA32 zone: 129319 pages, LIFO batch:15
  54. [    0.000000]   Normal zone: 3328 pages used for memmap
  55. [    0.000000]   Normal zone: 851968 pages, LIFO batch:15
  56. [    0.000000] percpu: Embedded 7 pages/cpu s67288 r8192 d39208 u4194304
  57. [    0.000000] pcpu-alloc: s67288 r8192 d39208 u4194304 alloc=1*33554432
  58. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  59. [    0.000000] CPU0 __my_cpu_offset: 69ec000
  60. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 977453
  61. [    0.000000] Policy zone: Normal
  62. [    0.000000] Kernel command line: vfio_iommu_type1.allow_unsafe_interrupts=1 nokaslr BOOT_IMAGE=/vmlinuz-4.19.0-19-loongson-3 root=UUID=5e76fb7b-e956-46d8-b068-83568e166783 ro quiet splash resume=PARTUUID=639db7fd-bc69-4718-ab33-d5ab5cde507e
  63. [    0.000000] Memory: 15443728K/15700592K available (11141K kernel code, 4767K rwdata, 3824K rodata, 1936K init, 9172K bss, 256864K reserved, 0K cma-reserved)
  64. [    0.000000] random: get_random_u64 called from __kmem_cache_create+0x48/0x4c0 with crng_init=0
  65. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  66. [    0.000000] ftrace: allocating 35439 entries in 35 pages
  67. [    0.000000] rcu: Hierarchical RCU implementation.
  68. [    0.000000] rcu:         RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  69. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  70. [    0.000000] NR_IRQS: 20544, nr_irqs: 20544, preallocated irqs: 16
  71. [    0.000000] Persistent clock returned invalid value
  72. [    0.000000] Constant clock event device register
  73. [    0.000000] clocksource: Constant: mask: 0xffffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
  74. [    0.000001] sched_clock: 64 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
  75. [    0.000002] Constant clock source device register
  76. [    0.000049] Console: colour dummy device 80x25
  77. [    0.000054] console [tty0] enabled
  78. [    0.000089] ACPI: Core revision 20180810
  79. [    0.001189] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000)
  80. [    0.001191] pid_max: default: 32768 minimum: 301
  81. [    0.001231] Security Framework initialized
  82. [    0.001232] Yama: becoming mindful.
  83. [    0.001239] AppArmor: AppArmor disabled by boot time parameter
  84. [    0.002552] Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes)
  85. [    0.003204] Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes)
  86. [    0.003254] Mount-cache hash table entries: 32768 (order: 4, 262144 bytes)
  87. [    0.003273] Mountpoint-cache hash table entries: 32768 (order: 4, 262144 bytes)
  88. [    0.003783] Performance counters: loongarch/loongson64 PMU enabled, 4 64-bit counters available to each CPU.
  89. [    0.003810] rcu: Hierarchical SRCU implementation.
  90. [    0.004358] smp: Bringing up secondary CPUs ...
  91. [    0.004442] Booting CPU#1...
  92. [    0.004450] 64-bit Loongson Processor probed (LA364 Core)
  93. [    0.004452] CPU1 revision is: 0014b020 (Loongson-64bit)
  94. [    0.004452] FPU1 revision is: 00000001
  95. [    0.004453] CPU1 __my_cpu_offset: 6dec000
  96. [    0.004464] CPU#1 finished
  97. [    0.004564] Booting CPU#2...
  98. [    0.004568] 64-bit Loongson Processor probed (LA364 Core)
  99. [    0.004569] CPU2 revision is: 0014b020 (Loongson-64bit)
  100. [    0.004570] FPU2 revision is: 00000001
  101. [    0.004571] CPU2 __my_cpu_offset: 71ec000
  102. [    0.004577] CPU#2 finished
  103. [    0.004671] Booting CPU#3...
  104. [    0.004675] 64-bit Loongson Processor probed (LA364 Core)
  105. [    0.004676] CPU3 revision is: 0014b020 (Loongson-64bit)
  106. [    0.004677] FPU3 revision is: 00000001
  107. [    0.004677] CPU3 __my_cpu_offset: 75ec000
  108. [    0.004683] CPU#3 finished
  109. [    0.004773] Booting CPU#4...
  110. [    0.004777] 64-bit Loongson Processor probed (LA364 Core)
  111. [    0.004779] CPU4 revision is: 0014b020 (Loongson-64bit)
  112. [    0.004780] FPU4 revision is: 00000001
  113. [    0.004780] CPU4 __my_cpu_offset: 79ec000
  114. [    0.004787] CPU#4 finished
  115. [    0.004878] Booting CPU#5...
  116. [    0.004881] 64-bit Loongson Processor probed (LA364 Core)
  117. [    0.004883] CPU5 revision is: 0014b020 (Loongson-64bit)
  118. [    0.004883] FPU5 revision is: 00000001
  119. [    0.004884] CPU5 __my_cpu_offset: 7dec000
  120. [    0.004890] CPU#5 finished
  121. [    0.004979] Booting CPU#6...
  122. [    0.004983] 64-bit Loongson Processor probed (LA364 Core)
  123. [    0.004984] CPU6 revision is: 0014b020 (Loongson-64bit)
  124. [    0.004985] FPU6 revision is: 00000001
  125. [    0.004986] CPU6 __my_cpu_offset: 81ec000
  126. [    0.004992] CPU#6 finished
  127. [    0.005083] Booting CPU#7...
  128. [    0.005087] 64-bit Loongson Processor probed (LA364 Core)
  129. [    0.005088] CPU7 revision is: 0014b020 (Loongson-64bit)
  130. [    0.005089] FPU7 revision is: 00000001
  131. [    0.005090] CPU7 __my_cpu_offset: 85ec000
  132. [    0.005095] CPU#7 finished
  133. [    0.005114] smp: Brought up 1 node, 8 CPUs
  134. [    0.005370] devtmpfs: initialized
  135. [    0.006504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  136. [    0.006511] futex hash table entries: 2048 (order: 3, 131072 bytes)
  137. [    0.006734] NET: Registered protocol family 16
  138. [    0.006968] audit: initializing netlink subsys (disabled)
  139. [    0.007002] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
  140. [    0.007119] cpuidle: using governor menu
  141. [    0.007401] ACPI: bus type PCI registered
  142. [    0.008963] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  143. [    0.009218] ACPI: Added _OSI(Module Device)
  144. [    0.009219] ACPI: Added _OSI(Processor Device)
  145. [    0.009220] ACPI: Added _OSI(3.0 _SCP Extensions)
  146. [    0.009221] ACPI: Added _OSI(Processor Aggregator Device)
  147. [    0.009223] ACPI: Added _OSI(Linux-Dell-Video)
  148. [    0.009224] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  149. [    0.013135] ACPI: 1 ACPI AML tables successfully acquired and loaded
  150. [    0.018093] ACPI: Interpreter enabled
  151. [    0.018109] ACPI: (supports S0 S3 S4 S5)
  152. [    0.018110] ACPI: Using LPIC for interrupt routing
  153. [    0.018122] ACPI: MCFG table detected, 1 entries
  154. [    0.018470] ACPI: Power Resource [PUBS] (on)
  155. [    0.020693] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  156. [    0.020698] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  157. [    0.020702] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  158. [    0.020710] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xfe00000000-0xfe0fffffff] for [bus 00-ff] with loongson_pci_ecam_ops
  159. [    0.021035] acpi PNP0A08:00: ECAM at [mem 0xfe00000000-0xfe1fffffff] for [bus 00-ff]
  160. [    0.021048] Remapped I/O 0x0000000018004000 to [io  0x4000-0xffff window]
  161. [    0.021131] PCI host bridge to bus 0000:00
  162. [    0.021133] pci_bus 0000:00: root bus resource [io  0x4000-0xffff window]
  163. [    0.021134] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff window]
  164. [    0.021135] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7cffffffff window]
  165. [    0.021137] pci_bus 0000:00: root bus resource [bus 00-ff]
  166. [    0.021167] pci 0000:00:03.0: [0014:7a23] type 00 class 0x020000
  167. [    0.021176] pci 0000:00:03.0: reg 0x10: [mem 0x4041248000-0x404124ffff 64bit]
  168. [    0.021255] pci 0000:00:03.1: [0014:7a23] type 00 class 0x020000
  169. [    0.021260] pci 0000:00:03.1: reg 0x10: [mem 0x4041240000-0x4041247fff 64bit]
  170. [    0.021324] pci 0000:00:04.0: [0014:7a44] type 00 class 0x0c0330
  171. [    0.021329] pci 0000:00:04.0: reg 0x10: [mem 0x4041100000-0x40411fffff 64bit]
  172. [    0.021387] pci 0000:00:06.0: [0014:7a35] type 00 class 0x040000
  173. [    0.021392] pci 0000:00:06.0: reg 0x10: [mem 0x404125c000-0x404125c0ff 64bit]
  174. [    0.021395] pci 0000:00:06.0: reg 0x18: [mem 0x4000000000-0x403fffffff 64bit]
  175. [    0.021399] pci 0000:00:06.0: reg 0x20: [mem 0x4041230000-0x404123ffff 64bit]
  176. [    0.021444] pci 0000:00:06.1: [0014:7a46] type 00 class 0x030000
  177. [    0.021450] pci 0000:00:06.1: reg 0x10: [mem 0x4041220000-0x404122ffff 64bit]
  178. [    0.021452] pci 0000:00:06.1: reg 0x18: [mem 0x40210000-0x402100ff]
  179. [    0.021501] pci 0000:00:06.2: [0014:7a37] type 00 class 0x040300
  180. [    0.021506] pci 0000:00:06.2: reg 0x10: [mem 0x4041210000-0x404121ffff 64bit]
  181. [    0.021558] pci 0000:00:06.3: [0014:7a56] type 00 class 0x048000
  182. [    0.021563] pci 0000:00:06.3: reg 0x10: [mem 0x4041254000-0x4041257fff 64bit]
  183. [    0.021613] pci 0000:00:06.4: [0014:7a66] type 00 class 0x048000
  184. [    0.021618] pci 0000:00:06.4: reg 0x10: [mem 0x4041250000-0x4041253fff 64bit]
  185. [    0.021627] pci 0000:00:06.4: reg 0x30: [mem 0xfffff800-0xffffffff pref]
  186. [    0.021670] pci 0000:00:07.0: [0014:7a07] type 00 class 0x040300
  187. [    0.021675] pci 0000:00:07.0: reg 0x10: [mem 0x4041200000-0x404120ffff 64bit]
  188. [    0.021731] pci 0000:00:09.0: [0014:7a99] type 01 class 0x060400
  189. [    0.021737] pci 0000:00:09.0: reg 0x10: [mem 0x404125b000-0x404125bfff 64bit]
  190. [    0.021753] pci 0000:00:09.0: supports D1 D2
  191. [    0.021754] pci 0000:00:09.0: PME# supported from D0 D1 D3hot D3cold
  192. [    0.021812] pci 0000:00:0d.0: [0014:7a99] type 01 class 0x060400
  193. [    0.021821] pci 0000:00:0d.0: reg 0x10: [mem 0x404125a000-0x404125afff 64bit]
  194. [    0.021843] pci 0000:00:0d.0: supports D1 D2
  195. [    0.021844] pci 0000:00:0d.0: PME# supported from D0 D1 D3hot D3cold
  196. [    0.021906] pci 0000:00:0e.0: [0014:7a89] type 01 class 0x060400
  197. [    0.021915] pci 0000:00:0e.0: reg 0x10: [mem 0x4041259000-0x4041259fff 64bit]
  198. [    0.021938] pci 0000:00:0e.0: supports D1 D2
  199. [    0.021939] pci 0000:00:0e.0: PME# supported from D0 D1 D3hot D3cold
  200. [    0.021997] pci 0000:00:16.0: [0014:7a1b] type 00 class 0x088000
  201. [    0.022002] pci 0000:00:16.0: reg 0x10: [mem 0x4041258000-0x4041258fff 64bit]
  202. [    0.022005] pci 0000:00:16.0: reg 0x18: [mem 0x4040000000-0x4040ffffff 64bit]
  203. [    0.022053] pci 0000:00:19.0: [0014:7a34] type 00 class 0x0c0330
  204. [    0.022058] pci 0000:00:19.0: reg 0x10: [mem 0x4041000000-0x40410fffff 64bit]
  205. [    0.022135] pci 0000:01:00.0: [1fa0:2283] type 00 class 0x010802
  206. [    0.022157] pci 0000:01:00.0: reg 0x10: [mem 0x40100000-0x40103fff 64bit]
  207. [    0.022187] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
  208. [    0.022259] pci 0000:01:00.0: reg 0x164: [mem 0x40100000-0x4010ffff 64bit]
  209. [    0.022260] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x40100000-0x401fffff 64bit] (contains BAR0 for 16 VFs)
  210. [    0.032056] pci 0000:04:00.0: [10ec:b852] type 00 class 0x028000
  211. [    0.032105] pci 0000:04:00.0: reg 0x10: [io  0x2000-0x20ff]
  212. [    0.032149] pci 0000:04:00.0: reg 0x18: [mem 0x40000000-0x400fffff 64bit]
  213. [    0.032321] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
  214. [    0.044063] pci 0000:00:09.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01-03] add_size 100000 add_align 100000
  215. [    0.044073] pci 0000:00:06.0: BAR 2: assigned [mem 0x4000000000-0x403fffffff 64bit]
  216. [    0.044077] pci 0000:00:16.0: BAR 2: assigned [mem 0x4040000000-0x4040ffffff 64bit]
  217. [    0.044079] pci 0000:00:04.0: BAR 0: assigned [mem 0x4041000000-0x40410fffff 64bit]
  218. [    0.044082] pci 0000:00:09.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
  219. [    0.044083] pci 0000:00:0d.0: BAR 14: assigned [mem 0x40200000-0x402fffff]
  220. [    0.044085] pci 0000:00:19.0: BAR 0: assigned [mem 0x4041100000-0x40411fffff 64bit]
  221. [    0.044088] pci 0000:00:06.0: BAR 4: assigned [mem 0x4041200000-0x404120ffff 64bit]
  222. [    0.044091] pci 0000:00:06.1: BAR 0: assigned [mem 0x4041210000-0x404121ffff 64bit]
  223. [    0.044094] pci 0000:00:06.2: BAR 0: assigned [mem 0x4041220000-0x404122ffff 64bit]
  224. [    0.044096] pci 0000:00:07.0: BAR 0: assigned [mem 0x4041230000-0x404123ffff 64bit]
  225. [    0.044099] pci 0000:00:03.0: BAR 0: assigned [mem 0x4041240000-0x4041247fff 64bit]
  226. [    0.044102] pci 0000:00:03.1: BAR 0: assigned [mem 0x4041248000-0x404124ffff 64bit]
  227. [    0.044104] pci 0000:00:06.3: BAR 0: assigned [mem 0x4041250000-0x4041253fff 64bit]
  228. [    0.044107] pci 0000:00:06.4: BAR 0: assigned [mem 0x4041254000-0x4041257fff 64bit]
  229. [    0.044110] pci 0000:00:09.0: BAR 0: assigned [mem 0x4041258000-0x4041258fff 64bit]
  230. [    0.044112] pci 0000:00:0d.0: BAR 0: assigned [mem 0x4041259000-0x4041259fff 64bit]
  231. [    0.044116] pci 0000:00:0d.0: BAR 13: assigned [io  0x4000-0x4fff]
  232. [    0.044117] pci 0000:00:0e.0: BAR 0: assigned [mem 0x404125a000-0x404125afff 64bit]
  233. [    0.044120] pci 0000:00:16.0: BAR 0: assigned [mem 0x404125b000-0x404125bfff 64bit]
  234. [    0.044123] pci 0000:00:06.4: BAR 6: assigned [mem 0x40300000-0x403007ff pref]
  235. [    0.044124] pci 0000:00:06.0: BAR 0: assigned [mem 0x404125c000-0x404125c0ff 64bit]
  236. [    0.044127] pci 0000:00:06.1: BAR 2: assigned [mem 0x40300800-0x403008ff]
  237. [    0.044132] pci 0000:01:00.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref]
  238. [    0.044134] pci 0000:01:00.0: BAR 7: assigned [mem 0x40010000-0x4010ffff 64bit]
  239. [    0.044138] pci 0000:01:00.0: BAR 0: assigned [mem 0x40110000-0x40113fff 64bit]
  240. [    0.044145] pci 0000:00:09.0: PCI bridge to [bus 01-03]
  241. [    0.044148] pci 0000:00:09.0:   bridge window [mem 0x40000000-0x401fffff]
  242. [    0.044150] pci 0000:04:00.0: BAR 2: assigned [mem 0x40200000-0x402fffff 64bit]
  243. [    0.044168] pci 0000:04:00.0: BAR 0: assigned [io  0x4000-0x40ff]
  244. [    0.044174] pci 0000:00:0d.0: PCI bridge to [bus 04]
  245. [    0.044175] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
  246. [    0.044177] pci 0000:00:0d.0:   bridge window [mem 0x40200000-0x402fffff]
  247. [    0.044180] pci 0000:00:0e.0: PCI bridge to [bus 05]
  248. [    0.044184] pci_bus 0000:00: resource 4 [io  0x4000-0xffff window]
  249. [    0.044185] pci_bus 0000:00: resource 5 [mem 0x40000000-0x7fffffff window]
  250. [    0.044186] pci_bus 0000:00: resource 6 [mem 0x4000000000-0x7cffffffff window]
  251. [    0.044187] pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff]
  252. [    0.044188] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
  253. [    0.044189] pci_bus 0000:04: resource 1 [mem 0x40200000-0x402fffff]
  254. [    0.044805] pci 0000:00:06.1: vgaarb: setting as boot VGA device
  255. [    0.044807] pci 0000:00:06.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  256. [    0.044810] pci 0000:00:06.1: vgaarb: bridge control possible
  257. [    0.044811] vgaarb: loaded
  258. [    0.044884] SCSI subsystem initialized
  259. [    0.044921] libata version 3.00 loaded.
  260. [    0.044944] ACPI: bus type USB registered
  261. [    0.044958] usbcore: registered new interface driver usbfs
  262. [    0.044965] usbcore: registered new interface driver hub
  263. [    0.044973] usbcore: registered new device driver usb
  264. [    0.045179] pps_core: LinuxPPS API ver. 1 registered
  265. [    0.045180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  266. [    0.045183] PTP clock support registered
  267. [    0.045188] EDAC MC: Ver: 3.0.0
  268. [    0.045271] Registered efivars operations
  269. [    0.045477] clocksource: Switched to clocksource Constant
  270. [    0.060873] VFS: Disk quotas dquot_6.6.0
  271. [    0.060895] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
  272. [    0.060995] pnp: PnP ACPI init
  273. [    0.061171] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
  274. [    0.061211] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
  275. [    0.061235] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
  276. [    0.061259] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
  277. [    0.061287] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
  278. [    0.061311] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
  279. [    0.061333] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
  280. [    0.061358] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
  281. [    0.061372] pnp: PnP ACPI: found 8 devices
  282. [    0.063055] NET: Registered protocol family 2
  283. [    0.063215] tcp_listen_portaddr_hash hash table entries: 8192 (order: 3, 131072 bytes)
  284. [    0.063249] TCP established hash table entries: 131072 (order: 6, 1048576 bytes)
  285. [    0.063422] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
  286. [    0.063740] TCP: Hash tables configured (established 131072 bind 65536)
  287. [    0.063776] UDP hash table entries: 8192 (order: 4, 262144 bytes)
  288. [    0.063815] UDP-Lite hash table entries: 8192 (order: 4, 262144 bytes)
  289. [    0.063898] NET: Registered protocol family 1
  290. [    0.063904] NET: Registered protocol family 44
  291. [    0.064053] PCI: CLS 0 bytes, default 64
  292. [    0.064099] Unpacking initramfs...
  293. [    0.522993] Freeing initrd memory: 28640K
  294. [    0.523799] SE-IRQ=34
  295. [    0.523807] SE-IRQ-low=35
  296. [    0.524286] Initialise system trusted keyrings
  297. [    0.524352] workingset: timestamp_bits=40 max_order=20 bucket_order=0
  298. [    0.525143] zbud: loaded
  299. [    0.525418] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  300. [    0.845477] random: fast init done
  301. [    0.900310] Key type asymmetric registered
  302. [    0.900312] Asymmetric key parser 'x509' registered
  303. [    0.900328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  304. [    0.900353] io scheduler noop registered
  305. [    0.900354] io scheduler deadline registered
  306. [    0.900389] io scheduler cfq registered (default)
  307. [    0.900390] io scheduler mq-deadline registered
  308. [    0.900528] ls-pwm LOON0006:00: pwm->clock_frequency=50000000
  309. [    0.900571] ls-pwm LOON0006:01: pwm->clock_frequency=50000000
  310. [    0.900597] ls-pwm LOON0006:02: pwm->clock_frequency=50000000
  311. [    0.900622] ls-pwm LOON0006:03: pwm->clock_frequency=50000000
  312. [    0.900969] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  313. [    0.901012] efifb: probing for efifb
  314. [    0.901024] efifb: framebuffer at 0x4000000000, using 8112k, total 8100k
  315. [    0.901025] efifb: mode is 1920x1080x32, linelength=7680, pages=1
  316. [    0.901025] efifb: scrolling: redraw
  317. [    0.901027] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  318. [    0.905618] Console: switching to colour frame buffer device 240x67
  319. [    0.910061] fb0: EFI VGA frame buffer device
  320. [    0.910130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  321. [    0.910147] ACPI: Power Button [PWRF]
  322. [    0.911254] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  323. [    0.911282] 00:00: ttyS0 at MMIO 0x1fe001e0 (irq = 30, base_baud = 6250000) is a Loongson-node 16550
  324. [    0.911368] 00:01: ttyS1 at MMIO 0x10100000 (irq = 31, base_baud = 3125000) is a 8250
  325. [    0.911437] 00:02: ttyS2 at MMIO 0x10100100 (irq = 31, base_baud = 3125000) is a 8250
  326. [    0.911506] 00:03: ttyS3 at MMIO 0x10100200 (irq = 31, base_baud = 3125000) is a 8250
  327. [    0.911570] 00:04: ttyS4 at MMIO 0x10100300 (irq = 31, base_baud = 3125000) is a 8250
  328. [    0.911635] 00:05: ttyS5 at MMIO 0x10100400 (irq = 31, base_baud = 3125000) is a 8250
  329. [    0.911698] 00:06: ttyS6 at MMIO 0x10100500 (irq = 31, base_baud = 3125000) is a 8250
  330. [    0.911761] 00:07: ttyS7 at MMIO 0x10100600 (irq = 31, base_baud = 3125000) is a 8250
  331. [    0.912921] Using IVHD type 0x10
  332. [    0.912925] device: ff:1f.7 seg: 0
  333. [    0.912927]   DEV_SELECT_RANGE_START         devid: ff:1f.7
  334. [    0.912929]   DEV_RANGE_END                 devid: ff:1f.7
  335. [    0.913472] megasas: 07.706.03.00-rc1
  336. [    0.913493] mpt3sas version 26.100.00.00 loaded
  337. [    0.913734] nvme nvme0: pci function 0000:01:00.0
  338. [    0.913953] loongson-spi-pci 0000:00:16.0: can't derive routing for PCI INT A
  339. [    0.913955] loongson-spi-pci 0000:00:16.0: PCI INT A: no GSI
  340. [    0.914058] libphy: Fixed MDIO Bus: probed
  341. [    0.914278] stmmaceth 0000:00:03.0: User ID: 0xd1, Synopsys ID: 0x12
  342. [    0.914280] stmmaceth 0000:00:03.0:         DWMAC_LOONGSON
  343. [    0.914281] stmmaceth 0000:00:03.0: DMA HW capability register supported
  344. [    0.914282] stmmaceth 0000:00:03.0: RX Checksum Offload Engine supported
  345. [    0.914284] stmmaceth 0000:00:03.0: COE Type 2
  346. [    0.914285] stmmaceth 0000:00:03.0: TX Checksum insertion supported
  347. [    0.914286] stmmaceth 0000:00:03.0: Wake-Up On Lan supported
  348. [    0.914287] stmmaceth 0000:00:03.0: Enhanced/Alternate descriptors
  349. [    0.914288] stmmaceth 0000:00:03.0: Enabled extended descriptors
  350. [    0.914289] stmmaceth 0000:00:03.0: Ring mode enabled
  351. [    0.914290] stmmaceth 0000:00:03.0: Enable RX Mitigation via HW Watchdog Timer
  352. [    0.914293] stmmaceth 0000:00:03.0 (unnamed net_device) (uninitialized): device MAC address d2:ad:53:ed:a8:dc
  353. [    0.923110] libphy: stmmac: probed
  354. [    0.923113] mdio_bus stmmac-18:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-18:00, irq=POLL)
  355. [    0.923115] mdio_bus stmmac-18:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-18:01, irq=POLL)
  356. [    0.923468] stmmaceth 0000:00:03.1: User ID: 0xd1, Synopsys ID: 0x12
  357. [    0.923470] stmmaceth 0000:00:03.1:         DWMAC_LOONGSON
  358. [    0.923471] stmmaceth 0000:00:03.1: DMA HW capability register supported
  359. [    0.923472] stmmaceth 0000:00:03.1: RX Checksum Offload Engine supported
  360. [    0.923473] stmmaceth 0000:00:03.1: COE Type 2
  361. [    0.923473] stmmaceth 0000:00:03.1: TX Checksum insertion supported
  362. [    0.923474] stmmaceth 0000:00:03.1: Wake-Up On Lan supported
  363. [    0.923475] stmmaceth 0000:00:03.1: Enhanced/Alternate descriptors
  364. [    0.923476] stmmaceth 0000:00:03.1: Enabled extended descriptors
  365. [    0.923477] stmmaceth 0000:00:03.1: Ring mode enabled
  366. [    0.923478] stmmaceth 0000:00:03.1: Enable RX Mitigation via HW Watchdog Timer
  367. [    0.923479] stmmaceth 0000:00:03.1 (unnamed net_device) (uninitialized): device MAC address fa:be:02:62:45:64
  368. [    0.931936] libphy: stmmac: probed
  369. [    0.931938] mdio_bus stmmac-19:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-19:00, irq=POLL)
  370. [    0.931939] mdio_bus stmmac-19:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-19:01, irq=POLL)
  371. [    0.932063] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  372. [    0.932071] ehci-pci: EHCI PCI platform driver
  373. [    0.932080] ehci-platform: EHCI generic platform driver
  374. [    0.932090] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  375. [    0.932092] ohci-pci: OHCI PCI platform driver
  376. [    0.932102] ohci-platform: OHCI generic platform driver
  377. [    0.932108] uhci_hcd: USB Universal Host Controller Interface driver
  378. [    0.932157] xhci_hcd 0000:00:04.0: xHCI Host Controller
  379. [    0.932163] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
  380. [    0.932315] xhci_hcd 0000:00:04.0: hcc params 0x0230fe6d hci version 0x110 quirks 0x0000000000000010
  381. [    0.932317] xhci_hcd 0000:00:04.0: cache line size of 64 is not supported
  382. [    0.932425] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  383. [    0.932426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  384. [    0.932427] usb usb1: Product: xHCI Host Controller
  385. [    0.932428] usb usb1: Manufacturer: Linux 4.19.0-19-loongson-3 xhci-hcd
  386. [    0.932430] usb usb1: SerialNumber: 0000:00:04.0
  387. [    0.932539] hub 1-0:1.0: USB hub found
  388. [    0.932548] hub 1-0:1.0: 4 ports detected
  389. [    0.932960] xhci_hcd 0000:00:04.0: xHCI Host Controller
  390. [    0.932964] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
  391. [    0.932966] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
  392. [    0.932990] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  393. [    0.933019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  394. [    0.933020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  395. [    0.933021] usb usb2: Product: xHCI Host Controller
  396. [    0.933022] usb usb2: Manufacturer: Linux 4.19.0-19-loongson-3 xhci-hcd
  397. [    0.933023] usb usb2: SerialNumber: 0000:00:04.0
  398. [    0.933109] hub 2-0:1.0: USB hub found
  399. [    0.933116] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  400. [    0.933211] xhci_hcd 0000:00:19.0: xHCI Host Controller
  401. [    0.933215] xhci_hcd 0000:00:19.0: new USB bus registered, assigned bus number 3
  402. [    0.933400] xhci_hcd 0000:00:19.0: hcc params 0x0238fe6d hci version 0x110 quirks 0x0000000000000010
  403. [    0.933402] xhci_hcd 0000:00:19.0: cache line size of 64 is not supported
  404. [    0.933506] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  405. [    0.933507] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  406. [    0.933508] usb usb3: Product: xHCI Host Controller
  407. [    0.933509] usb usb3: Manufacturer: Linux 4.19.0-19-loongson-3 xhci-hcd
  408. [    0.933510] usb usb3: SerialNumber: 0000:00:19.0
  409. [    0.933588] hub 3-0:1.0: USB hub found
  410. [    0.933595] hub 3-0:1.0: 4 ports detected
  411. [    0.933693] xhci_hcd 0000:00:19.0: xHCI Host Controller
  412. [    0.933696] xhci_hcd 0000:00:19.0: new USB bus registered, assigned bus number 4
  413. [    0.933699] xhci_hcd 0000:00:19.0: Host supports USB 3.0 SuperSpeed
  414. [    0.933718] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  415. [    0.933745] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  416. [    0.933746] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  417. [    0.933747] usb usb4: Product: xHCI Host Controller
  418. [    0.933748] usb usb4: Manufacturer: Linux 4.19.0-19-loongson-3 xhci-hcd
  419. [    0.933749] usb usb4: SerialNumber: 0000:00:19.0
  420. [    0.933826] hub 4-0:1.0: USB hub found
  421. [    0.933833] hub 4-0:1.0: 4 ports detected
  422. [    0.933979] i8042: PNP: No PS/2 controller found.
  423. [    0.934032] mousedev: PS/2 mouse device common for all mice
  424. [    0.935786] rtc rtc0: invalid alarm value: 1966-6-1 2:2:53
  425. [    0.935819] ls2x-rtc LOON0001:00: rtc core: registered LOON0001:00 as rtc0
  426. [    0.936680] i2c /dev entries driver
  427. [    0.936775] ls2k_sdio PRP0001:00: missing #address-cells property
  428. [    0.936799] of_dma_request_slave_channel: not enough information provided
  429. [    0.936824] ls2k_sdio PRP0001:00: Use exclusive dma engine.
  430. [    1.130415] nvme nvme0: missing or invalid SUBNQN field.
  431. [    1.229931] nvme nvme0: allocated 128 MiB host memory buffer.
  432. [    1.262092] ledtrig-cpu: registered to indicate activity on CPUs
  433. [    1.262168] hidraw: raw HID events driver (C) Jiri Kosina
  434. [    1.262214] usbcore: registered new interface driver usbhid
  435. [    1.262214] usbhid: USB HID core driver
  436. [    1.262238] Loongson Hwmon Enter...
  437. [    1.262240] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  438. [    1.262261] Initial CPU temperature is 35000 (highest).
  439. [    1.262652] NET: Registered protocol family 10
  440. [    1.264061]  nvme0n1: p1 p2 p3 p4 p5 p6
  441. [    1.265764] Segment Routing with IPv6
  442. [    1.265779] mip6: Mobile IPv6
  443. [    1.265781] NET: Registered protocol family 17
  444. [    1.265807] mpls_gso: MPLS GSO support
  445. [    1.265971] registered taskstats version 1
  446. [    1.265972] Loading compiled-in X.509 certificates
  447. [    1.266515] ls2x-rtc LOON0001:00: setting system clock to 2025-12-30 01:16:03 UTC (1767057363)
  448. [    1.266538] loongson3_acpi_cpufreq: Boost capabilities not present in the processor
  449. [    1.266686] loongson3_acpi_cpufreq: CPU0 - ACPI performance management activated.
  450. [    1.270701] loongson3_acpi_cpufreq: CPU1 - ACPI performance management activated.
  451. [    1.270785] loongson3_acpi_cpufreq: CPU2 - ACPI performance management activated.
  452. [    1.270869] loongson3_acpi_cpufreq: CPU3 - ACPI performance management activated.
  453. [    1.270951] loongson3_acpi_cpufreq: CPU4 - ACPI performance management activated.
  454. [    1.271033] loongson3_acpi_cpufreq: CPU5 - ACPI performance management activated.
  455. [    1.271121] loongson3_acpi_cpufreq: CPU6 - ACPI performance management activated.
  456. [    1.271203] loongson3_acpi_cpufreq: CPU7 - ACPI performance management activated.
  457. [    1.271437] PM: Image not found (code -22)
  458. [    1.276161] Freeing unused kernel memory: 1936K
  459. [    1.276162] This architecture does not have kernel memory protection.
  460. [    1.276164] Run /init as init process
  461. [    1.283525] systemd[1]: Inserted module 'autofs4'
  462. [    1.290696] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  463. [    1.290893] systemd[1]: Detected architecture loongarch64.
  464. [    1.290895] systemd[1]: Running in initial RAM disk.
  465. [    1.291868] systemd[1]: Set hostname to <2k3knuc>.
  466. [    1.334352] random: systemd: uninitialized urandom read (16 bytes read)
  467. [    1.334425] systemd[1]: Listening on udev Kernel Socket.
  468. [    1.334466] random: systemd: uninitialized urandom read (16 bytes read)
  469. [    1.334475] systemd[1]: Reached target Slices.
  470. [    1.334484] random: systemd: uninitialized urandom read (16 bytes read)
  471. [    1.334491] systemd[1]: Reached target Swap.
  472. [    1.334573] systemd[1]: Listening on udev Control Socket.
  473. [    1.334589] systemd[1]: Reached target Timers.
  474. [    1.334702] systemd[1]: Listening on Journal Audit Socket.
  475. [    1.364734] usb 1-1: new full-speed USB device number 2 using xhci_hcd
  476. [    1.364763] usb 3-1: new full-speed USB device number 2 using xhci_hcd
  477. [    1.459576] stmmaceth 0000:00:03.0 enp0s3f0: renamed from eth0
  478. [    1.462153] loonggpu: loading out-of-tree module taints kernel.
  479. [    1.597467] Virtual CRAT table created for CPU
  480. [    1.597505] Topology: Add CPU node
  481. [    1.597533] [drm] loonggpu kernel modesetting enabled.
  482. [    1.634539] XFS (nvme0n1p3): Mounting V5 Filesystem
  483. [    1.642218] XFS (nvme0n1p3): Starting recovery (logdev: internal)
  484. [    1.645579] XFS (nvme0n1p3): Ending recovery (logdev: internal)
  485. [    1.680710] checking generic (4000000000 7ec000) vs hw (0 ffffffffffffffff)
  486. [    1.680714] fb: switching to loonggpudrmfb from EFI VGA
  487. [    1.680746] Console: switching to colour dummy device 80x25
  488. [    1.681094] [drm] initializing kernel modesetting (LG200 0x0014:0x7A35 0x0000:0x0000 0x10).
  489. [    1.681096] [drm] Set 2K3000 device in loonggpu driver
  490. [    1.681099] [drm] register mmio base: 0x4125C000
  491. [    1.681100] [drm] register mmio size: 256
  492. [    1.681101] [drm] loonggpu dc register mmio base: 0x41210000
  493. [    1.681102] [drm] loonggpu dc register mmio size: 65536
  494. [    1.681111] [drm] loonggpu dc io base: 0xffffff8125da8000
  495. [    1.682628] stmmaceth 0000:00:03.1 enp0s3f1: renamed from eth1
  496. [    1.894030] [drm] GPU Family: LG200 series LG200, Feature:0x00000000
  497. [    1.894031] [drm] Firmware Version: 1.0.0
  498. [    1.994107] [drm] aper_base 0x4000000000 SIZE 0x40000000 bytes
  499. [    1.994113] loonggpu 0000:00:06.0: Video RAM: 1024M 0x0000004000000000 - 0x000000403FFFFFFF (1024M used)
  500. [    1.994114] loonggpu 0000:00:06.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
  501. [    1.994174] [TTM] Zone  kernel: Available graphics memory: 7737152 kiB
  502. [    1.994175] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
  503. [    1.994176] [TTM] Initializing pool allocator
  504. [    1.994194] [TTM] Initializing DMA pool allocator
  505. [    1.994236] usb 1-1: New USB device found, idVendor=0bda, idProduct=b85b, bcdDevice= 0.00
  506. [    1.994237] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  507. [    1.994239] usb 1-1: Product: Bluetooth Radio
  508. [    1.994240] usb 1-1: Manufacturer: Realtek
  509. [    1.994240] usb 1-1: SerialNumber: 00e04c000001
  510. [    1.994413] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  511. [    1.994415] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  512. [    1.994416] usb 3-1: Product: TouchScreen
  513. [    1.994417] usb 3-1: Manufacturer: wch.cn
  514. [    1.994418] usb 3-1: SerialNumber: 9LQ0172005164
  515. [    1.995124] [drm] loonggpu: 3072M of GTT memory ready.
  516. [    1.995138] [drm] GART: num cpu pages 65536, num gpu pages 65536
  517. [    1.995151] [drm] vm size is 1024 GB, 3 levels, block size is 11-bit
  518. [    1.996466] [drm] PCIE GART of 1024M enabled (table at 0x0000004000000000).
  519. [    1.996586] [drm] ZIP META: num cpu pages 512, num gpu pages 512
  520. [    2.099616] [drm] LOONGGPU get vbios from vram Success
  521. [    2.099625] [drm] LOONGGPU vbios header info:
  522. [    2.099627] [drm] ver:2.1 links:2 max_planes:-1 name:Loongson-VBIOS info:
  523. [    2.099627] [drm] oem-vendor:\xf0b oem-product:2022
  524. [    2.099629] [drm] LOONGGPU vbios crtc-0 max_frep:340000 width:4096 height:4096
  525. [    2.099630] [drm] LOONGGPU vbios crtc-1 max_frep:340000 width:4096 height:4096
  526. [    2.099630] [drm] The video memory and gpu information is not obtained from the vbios!
  527. [    2.099635] [drm] Encoder Parse: #0x04-dp feature:0 type:lvds hotplug:polling.
  528. [    2.099637] [drm] Encoder Parse: config_type:timing edid_method:encoder reset_gpio:0.
  529. [    2.099639] [drm] Encoder Parse: #0x02-hdmi feature:0 type:tmds hotplug:polling.
  530. [    2.099639] [drm] Encoder Parse: config_type:timing edid_method:i2c reset_gpio:0.
  531. [    2.099640] [drm] LOONGGPU Display Core initialized with v1.0!
  532. [    2.099641] [drm] LOONGGPU DC construct links:2
  533. [    2.099642] [drm] LOONGGPU DC construct links:2
  534. [    2.119488] [drm] PCIE ZIP META of 8M enabled (table at 0x0000004000200000).
  535. [    2.285506] [drm] [Bridge_phy] dp encoder-0 be attach to this bridge.
  536. [    2.285507] [drm] [Bridge_phy] dp init finish.
  537. [    2.285589] [drm] LOONGGPU DC init i2c 1 addr 0x50 finish
  538. [    2.285593] [drm] [Bridge_phy] hdmi encoder-1 be attach to this bridge.
  539. [    2.285594] [drm] [Bridge_phy] hdmi init finish.
  540. [    2.285596] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  541. [    2.285597] [drm] Driver supports precise vblank timestamp query.
  542. [    2.285614] [drm] LOONGGPU DC irq init sources number:9
  543. [    2.285615] [drm] LOONGGPU Display Crtcs
  544. [    2.285616] [drm] Crtc 0: name:crtc-0
  545. [    2.285616] [drm] Crtc 1: name:crtc-1
  546. [    2.285617] [drm] LOONGGPU Display Connectors
  547. [    2.285618] [drm] Connector 0: name:DP-1
  548. [    2.285618] [drm] Connector 1: name:HDMI-A-1
  549. [    2.285619] [drm] LOONGGPU Display Encoders
  550. [    2.285620] [drm] Encoder 0: name:TMDS-36
  551. [    2.285620] [drm] Encoder 1: name:TMDS-38
  552. [    2.290375] [drm] Config crtc number:2 meta addr 0x4000a00000
  553. [    3.292009] kcd kcd: Allocated 4194304 bytes on gart
  554. [    3.292012] kcd kcd: CWSR trap disabled
  555. [    3.292013] kcd kcd: Total number of KCD nodes to be created: 1
  556. [    3.292132] kcd kcd: num of queues: 8
  557. [    3.292340] [drm] load kq base 0x00110c000 size = 0x200
  558. [    3.292347] Virtual CRAT table created for GPU
  559. [    3.292403] Topology: Add dGPU node [0x7a35:0x14]
  560. [    3.292405] kcd kcd: added device 14:7a35
  561. [    3.349482] usb 3-2: new low-speed USB device number 3 using xhci_hcd
  562. [    3.503969] usb 3-2: New USB device found, idVendor=1a2c, idProduct=0e24, bcdDevice= 1.10
  563. [    3.503970] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  564. [    3.503971] usb 3-2: Product: USB Keyboard
  565. [    3.503972] usb 3-2: Manufacturer: SEM
  566. [    3.657479] usb 3-3: new low-speed USB device number 4 using xhci_hcd
  567. [    3.811548] usb 3-3: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice=24.58
  568. [    3.811549] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  569. [    3.811551] usb 3-3: Product: Lenovo USB Optical Mouse
  570. [    3.811552] usb 3-3: Manufacturer: Elan
  571. [    3.933478] [drm] LOONGGPU DC: write reg 0 failed, target value is 0, but read-back value is 4
  572. [    4.341480] [drm] dp_phy_rate: 0, dp_phy_xlane: 0, dp_link_rate: 6 dp_pixclk: 0
  573. [    4.341481] [drm] This pclk is within the normal range.
  574. [    5.069479] [drm] set TPS2...
  575. [    5.868337] [drm] fb mappable at 0x4000C00000
  576. [    5.868338] [drm] vram apper at 0x4000000000
  577. [    5.868339] [drm] size 8306688
  578. [    5.868339] [drm] fb depth is 24
  579. [    5.868340] [drm]    pitch is 7680
  580. [    5.868341] [drm] screen_base 0xFFFFFF8128000000
  581. [    5.868341] [drm] screen_size 0x7EC000
  582. [    6.381479] [drm] dp_phy_rate: 0, dp_phy_xlane: 2, dp_link_rate: 6 dp_pixclk: 148500
  583. [    6.381480] [drm] This pclk is within the normal range.
  584. [    7.109479] [drm] set TPS2...
  585. [    7.813479] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  586. [    7.813480] [drm] This pclk is within the normal range.
  587. [    8.413478] [drm] set TPS3...
  588. [    8.673484] Console: switching to colour frame buffer device 128x48
  589. [    8.692451] loonggpu-dc 0000:00:06.1: fb0: loonggpudrmfb frame buffer device
  590. [    8.709747] [drm] Initialized loonggpu 1.0.0 20250815.00 for 0000:00:06.1 on minor 0
  591. [    8.843863] systemd-journald[166]: Received SIGTERM from PID 1 (systemd).
  592. [    8.857513] systemd: 16 output lines suppressed due to ratelimiting
  593. [    8.913117] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  594. [    8.913299] systemd[1]: Detected architecture loongarch64.
  595. [    8.913735] systemd[1]: Set hostname to <2k3knuc>.
  596. [    8.972328] systemd[1]: Configuration file /lib/systemd/system/sw-gl.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  597. [    9.029344] systemd[1]: initrd-switch-root.service: Succeeded.
  598. [    9.029919] systemd[1]: Stopped Switch Root.
  599. [    9.030180] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
  600. [    9.030240] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
  601. [    9.030253] systemd[1]: Stopped Journal Service.
  602. [    9.031325] systemd[1]: Starting Load Kernel Modules...
  603. [    9.146470] Decoder Base hw val 0x4041250000
  604. [    9.146474] Decoder Base hw len 0x4000
  605. [    9.146520] Encoder Base hw val 0x4041254000
  606. [    9.146520] Encoder Base hw len 0x4000
  607. [    9.146809] [drm] Initialized hantro 1.1.0 20251009 for 0000:00:06.3 on minor 1
  608. [    9.172324] EFI Variables Facility v0.08 2004-May-17
  609. [    9.172400] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
  610. [    9.176605] pstore: Using compression: deflate
  611. [    9.176639] pstore: Registered efi as persistent store backend
  612. [    9.296007] VPU: Reserve totol memory size: 1215 M
  613. [    9.296941] hantrovcmd: HW at base <0x4041250000> with ID <0x43421500>
  614. [    9.297043] vcmd_driver:create cmdbuf data when hw_version_id = 0x43421500
  615. [    9.351763] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  616. [    9.371528] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:hp
  617. [    9.371531] snd_hda_codec_generic hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  618. [    9.371533] snd_hda_codec_generic hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  619. [    9.371534] snd_hda_codec_generic hdaudioC1D0:    mono: mono_out=0x0
  620. [    9.371535] snd_hda_codec_generic hdaudioC1D0:    inputs:
  621. [    9.371537] snd_hda_codec_generic hdaudioC1D0:      Internal Mic=0x1a
  622. [    9.371538] snd_hda_codec_generic hdaudioC1D0:      Mic=0x19
  623. [    9.397772] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  624. [    9.401524] PKCS#7 signature not signed with a trusted key
  625. [    9.401700] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
  626. [    9.448628] Bluetooth: Core ver 2.22
  627. [    9.448655] NET: Registered protocol family 31
  628. [    9.448656] Bluetooth: HCI device and connection manager initialized
  629. [    9.448662] Bluetooth: HCI socket layer initialized
  630. [    9.448665] Bluetooth: L2CAP socket layer initialized
  631. [    9.448674] Bluetooth: SCO socket layer initialized
  632. [    9.458636] usbcore: registered new interface driver btusb
  633. [    9.465844] input: HDA Loongson HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:06.2/sound/card0/input1
  634. [    9.465944] input: HDA Loongson HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:06.2/sound/card0/input4
  635. [    9.466063] input: HDA Loongson Mic as /devices/pci0000:00/0000:00:07.0/sound/card1/input2
  636. [    9.466126] input: HDA Loongson Headphone as /devices/pci0000:00/0000:00:07.0/sound/card1/input3
  637. [    9.469021] Bluetooth: hci0: RTL: rtl: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852

  639. [    9.471044] Bluetooth: hci0: RTL: rom_version status=0 version=1

  641. [    9.471049] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8852bu_fw.bin

  643. [    9.472141] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8852bu_config.bin

  645. [    9.472270] Bluetooth: hci0: RTL: cfg_sz 6, total sz 58003

  647. [    9.478411] XFS (nvme0n1p5): Mounting V5 Filesystem
  648. [    9.502849] input: wch.cn TouchScreen Touchscreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0001/input/input5
  649. [    9.503080] hid-generic 0003:27C0:0859.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  650. [    9.503279] hid-generic 0003:27C0:0859.0002: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  651. [    9.503426] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.0003/input/input6
  652. [    9.503521] hid-generic 0003:27C0:0859.0003: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  653. [    9.503673] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:19.0/usb3/3-2/3-2:1.0/0003:1A2C:0E24.0004/input/input7
  654. [    9.527813] XFS (nvme0n1p5): Starting recovery (logdev: internal)
  655. [    9.534092] XFS (nvme0n1p5): Ending recovery (logdev: internal)
  656. [    9.561786] hid-generic 0003:1A2C:0E24.0004: input,hidraw3: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:19.0-2/input0
  657. [    9.562650] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:19.0/usb3/3-2/3-2:1.1/0003:1A2C:0E24.0005/input/input8
  658. [    9.574186] systemd-journald[380]: Received request to flush runtime journal from PID 1
  659. [    9.625615] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:19.0/usb3/3-2/3-2:1.1/0003:1A2C:0E24.0005/input/input9
  660. [    9.625688] hid-generic 0003:1A2C:0E24.0005: input,hidraw4: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:19.0-2/input1
  661. [    9.625863] input: Elan Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:19.0/usb3/3-3/3-3:1.0/0003:17EF:608D.0006/input/input10
  662. [    9.625960] hid-generic 0003:17EF:608D.0006: input,hidraw5: USB HID v1.11 Mouse [Elan Lenovo USB Optical Mouse] on usb-0000:00:19.0-3/input0
  663. [   10.301518] vcmd_driver: main module register 0:0x90012012
  664. [   10.301522] vcmd_driver: main module register 50:0x09510000
  665. [   10.301522] vcmd_driver: main module register 54:0x00820400
  666. [   10.301523] vcmd_driver: main module register 56:0x0800004a
  667. [   10.301524] vcmd_driver: main module register 309:0x80001ff9
  668. [   10.302156] hantrovcmd: HW at base <0x4041254000> with ID <0x43421500>
  669. [   10.302259] vcmd_driver:create cmdbuf data when hw_version_id = 0x43421500
  670. [   10.489512] random: crng init done
  671. [   10.489516] random: 7 urandom warning(s) missed due to ratelimiting
  672. [   10.777102] this driver version is 01.10.220111
  673. [   11.325514] vcmd_driver: main module register 0:0x90009100
  674. [   11.325517] vcmd_driver: main module register 80:0x98dfc200
  675. [   11.325518] vcmd_driver: main module register 214:0x48401000
  676. [   11.325518] vcmd_driver: main module register 226:0x8a19291
  677. [   11.325520] vcmd_driver: main module register 287:0x40a28000
  678. [   11.325520] vcmd_driver: main module register 509:0x2151
  679. [   11.325526] hantro 0000:00:06.3: Unbalanced pm_runtime_enable!
  680. [   11.325526] hantro device created
  681. [   11.843936] usb 3-1: USB disconnect, device number 2
  682. [   17.161545] Adding 9227440k swap on /dev/nvme0n1p6.  Priority:-2 extents:1 across:9227440k SS
  683. [   17.202236] EXT4-fs (nvme0n1p2): mounting ext3 file system using the ext4 subsystem
  684. [   17.205650] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
  685. [   17.250695] hid-multitouch 0003:27C0:0859.0001: failed to fetch feature 10
  686. [   17.250770] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0001/input/input11
  687. [   17.252007] hid-multitouch 0003:27C0:0859.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  688. [   17.252016] hid-multitouch 0003:27C0:0859.0001: usb_submit_urb(ctrl) failed: -19
  689. [   17.469923] eric-tx CALL alloc_txring !!!!
  690. [   17.472462] rtl8852be 0000:04:00.0 wlp4s0: renamed from wlan0
  691. [   17.797400] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  692. [   17.797403] Bluetooth: BNEP filters: protocol multicast
  693. [   17.797410] Bluetooth: BNEP socket layer initialized
  694. [   17.861498] usb 3-1: new full-speed USB device number 5 using xhci_hcd
  695. [   17.999122] IPv6: ADDRCONF(NETDEV_UP): enp0s3f0: link is not ready
  696. [   17.999843] YT8531 Gigabit Ethernet stmmac-18:00: attached PHY driver [YT8531 Gigabit Ethernet] (mii_bus:phy_addr=stmmac-18:00, irq=POLL)
  697. [   18.009500] stmmaceth 0000:00:03.0 enp0s3f0: No Safety Features support found
  698. [   18.009507] stmmaceth 0000:00:03.0 enp0s3f0: IEEE 1588-2008 Advanced Timestamp supported
  699. [   18.009594] stmmaceth 0000:00:03.0 enp0s3f0: registered PTP clock
  700. [   18.009853] IPv6: ADDRCONF(NETDEV_UP): enp0s3f0: link is not ready
  701. [   18.011038] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  702. [   18.011040] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  703. [   18.011041] usb 3-1: Product: TouchScreen
  704. [   18.011042] usb 3-1: Manufacturer: wch.cn
  705. [   18.011043] usb 3-1: SerialNumber: 9LQ0172005164
  706. [   18.016551] IPv6: ADDRCONF(NETDEV_UP): enp0s3f1: link is not ready
  707. [   18.017256] YT8531 Gigabit Ethernet stmmac-19:00: attached PHY driver [YT8531 Gigabit Ethernet] (mii_bus:phy_addr=stmmac-19:00, irq=POLL)
  708. [   18.025509] stmmaceth 0000:00:03.1 enp0s3f1: No Safety Features support found
  709. [   18.025515] stmmaceth 0000:00:03.1 enp0s3f1: IEEE 1588-2008 Advanced Timestamp supported
  710. [   18.025605] stmmaceth 0000:00:03.1 enp0s3f1: registered PTP clock
  711. [   18.025807] IPv6: ADDRCONF(NETDEV_UP): enp0s3f1: link is not ready
  712. [   18.028919] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  713. [   18.123231] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0007/input/input12
  714. [   18.123394] hid-multitouch 0003:27C0:0859.0007: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  715. [   18.123986] hid-generic 0003:27C0:0859.0008: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  716. [   18.125039] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.0009/input/input13
  717. [   18.125153] hid-generic 0003:27C0:0859.0009: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  718. [   18.180254] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  719. [   18.459762] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  720. [   18.551808] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  721. [   19.081479] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  722. [   19.489481] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  723. [   19.489482] [drm] This pclk is within the normal range.
  724. [   20.089480] [drm] set TPS3...
  725. [   20.786140] usb 3-1: USB disconnect, device number 5
  726. [   21.377478] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  727. [   22.585481] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  728. [   22.585482] [drm] This pclk is within the normal range.
  729. [   23.205479] [drm] No Dp device detected!
  730. [   24.157918] CPU: 3 PID: 1011 Comm: disp_eng_share_ Tainted: G           O      4.19.0-19-loongson-3 #1
  731. [   24.157921] Hardware name: Loongson Loongson-3B6000M-EVB/EVB, BIOS UDK_3B6000M_NUC_V0.41_1013A 10/14/25 09:23:49
  732. [   24.157922] Stack : 90000003b8923a88 9000000000cd200c 90000003b8920000 90000003b89239c0
  733. [   24.157924]         0000000000000000 90000003b89239c0 0000000000000000 9000000001777734
  734. [   24.157925]         0000000000000040 0000000000000000 9000000001767b0a 0000000000000074
  735. [   24.157927]         9000000000cd200c 0000000000000007 0000000000000006 0000000000000007
  736. [   24.157928]         9000000008c008a8 0000000000000001 00000000000002d6 0000000000000004
  737. [   24.157929]         0000000000000000 00000000075ec000 ffffff816d0a48db 0000000000000000
  738. [   24.157931]         90000000011910d0 0000000000000004 0000000000000000 0000000000000000
  739. [   24.157932]         0000000000000001 ffffff816d0a4000 00000000000000ed ffffff816d0a4888
  740. [   24.157933]         900000000020a094 0000007fc8564418 00000000000000b0 0000000000000004
  741. [   24.157934]         0000000000000000 0000000000071c1c 0000000000000000 90000000011910d0
  742. [   24.157936]         ...
  743. [   24.157937] Call Trace:
  744. [   24.157944] [<900000000020a094>] show_stack+0x34/0x140
  745. [   24.157948] [<9000000000cd2008>] dump_stack+0xa4/0xdc
  746. [   24.158093] [<ffffff8003f87a6c>] rtw_phl_btc_send_cmd+0x108/0x114 [8852be]
  747. [   24.158143] [<ffffff8003f9e7c0>] hal_btc_send_event+0x14/0x24 [8852be]
  748. [   24.158191] [<ffffff800401d1f0>] _update_bt_scbd+0x1f8/0x21c [8852be]
  749. [   24.158236] [<ffffff8004025274>] _chk_btc_err+0x29c/0x2d4 [8852be]
  750. [   24.158282] [<ffffff8004026388>] hal_btc_fw_event+0x790/0x984 [8852be]
  751. [   24.158327] [<ffffff800401d38c>] _ntfy_fwinfo+0x9c/0x6e8 [8852be]
  752. [   24.158376] [<ffffff8003f9e610>] rtw_hal_btc_fwinfo_ntfy+0x22c/0x2bc [8852be]
  753. [   24.158424] [<ffffff8003f8770c>] _btc_msg_hdlr+0xe4/0x284 [8852be]
  754. [   24.158471] [<ffffff8003f80ef0>] feed_mdl_msg+0x38/0xe4 [8852be]
  755. [   24.158518] [<ffffff8003f81250>] msg_post_phase_hdl+0xf0/0x1c4 [8852be]
  756. [   24.158564] [<ffffff8003f816d0>] msg_dispatch+0x1c8/0x200 [8852be]
  757. [   24.158611] [<ffffff8003f83a2c>] dispr_thread_loop_hdl+0x1ac/0x1b4 [8852be]
  758. [   24.158657] [<ffffff8003f83b08>] dispr_share_thread_loop_hdl+0x10/0x20 [8852be]
  759. [   24.158704] [<ffffff8003f7ee34>] share_thread_hdl+0x70/0x120 [8852be]
  760. [   24.158707] [<900000000024e6d8>] kthread+0x128/0x130
  761. [   24.158709] [<90000000002031e8>] ret_from_kernel_thread+0x8/0x10
  762. [   24.215237] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  763. [   24.216250] Bridge firewalling registered
  764. [   24.334593] Initializing XFRM netlink socket
  765. [   24.403854] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
  766. [   25.461489] usb 3-1: new full-speed USB device number 6 using xhci_hcd
  767. [   25.615851] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  768. [   25.615854] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  769. [   25.615855] usb 3-1: Product: TouchScreen
  770. [   25.615856] usb 3-1: Manufacturer: wch.cn
  771. [   25.615858] usb 3-1: SerialNumber: 9LQ0172005164
  772. [   25.659238] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.000A/input/input14
  773. [   25.659390] hid-multitouch 0003:27C0:0859.000A: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  774. [   25.659994] hid-generic 0003:27C0:0859.000B: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  775. [   25.661043] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.000C/input/input15
  776. [   25.661160] hid-generic 0003:27C0:0859.000C: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  777. [   26.409480] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  778. [   26.817480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  779. [   26.817481] [drm] This pclk is within the normal range.
  780. [   27.417479] [drm] set TPS3...
  781. [   29.009480] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  782. [   29.417480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  783. [   29.417481] [drm] This pclk is within the normal range.
  784. [   29.720421] usb 3-1: USB disconnect, device number 6
  785. [   31.769481] [drm] set TPS3...
  786. [   31.861484] usb 3-1: new full-speed USB device number 7 using xhci_hcd
  787. [   32.011018] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  788. [   32.011019] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  789. [   32.011021] usb 3-1: Product: TouchScreen
  790. [   32.011022] usb 3-1: Manufacturer: wch.cn
  791. [   32.011023] usb 3-1: SerialNumber: 9LQ0172005164
  792. [   32.051237] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.000D/input/input16
  793. [   32.051391] hid-multitouch 0003:27C0:0859.000D: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  794. [   32.051945] hid-generic 0003:27C0:0859.000E: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  795. [   32.052971] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.000F/input/input17
  796. [   32.053093] hid-generic 0003:27C0:0859.000F: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  797. [   33.121481] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  798. [   33.529480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  799. [   33.529481] [drm] This pclk is within the normal range.
  800. [   34.129480] [drm] set TPS3...
  801. [   35.561479] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  802. [   35.969480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  803. [   35.969481] [drm] This pclk is within the normal range.
  804. [   36.569479] [drm] set TPS3...
  805. [   37.849479] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  806. [   38.257480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  807. [   38.257481] [drm] This pclk is within the normal range.
  808. [   38.857480] [drm] set TPS3...
  809. [   40.289479] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  810. [   40.697480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  811. [   40.697481] [drm] This pclk is within the normal range.
  812. [   41.297480] [drm] set TPS3...
  813. [   41.913656] usb 3-1: USB disconnect, device number 7
  814. [   46.593487] usb 3-1: new full-speed USB device number 8 using xhci_hcd
  815. [   46.743851] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  816. [   46.743852] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  817. [   46.743854] usb 3-1: Product: TouchScreen
  818. [   46.743855] usb 3-1: Manufacturer: wch.cn
  819. [   46.743856] usb 3-1: SerialNumber: 9LQ0172005164
  820. [   46.787227] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0010/input/input18
  821. [   46.787387] hid-multitouch 0003:27C0:0859.0010: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  822. [   46.787950] hid-generic 0003:27C0:0859.0011: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  823. [   46.788968] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.0012/input/input19
  824. [   46.789083] hid-generic 0003:27C0:0859.0012: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  825. [   50.871348] usb 3-1: USB disconnect, device number 8
  826. [   55.545490] usb 3-1: new full-speed USB device number 9 using xhci_hcd
  827. [   55.695848] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  828. [   55.695850] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  829. [   55.695851] usb 3-1: Product: TouchScreen
  830. [   55.695852] usb 3-1: Manufacturer: wch.cn
  831. [   55.695853] usb 3-1: SerialNumber: 9LQ0172005164
  832. [   55.739229] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0013/input/input20
  833. [   55.739387] hid-multitouch 0003:27C0:0859.0013: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  834. [   55.739948] hid-generic 0003:27C0:0859.0014: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  835. [   55.740971] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.0015/input/input21
  836. [   55.741082] hid-generic 0003:27C0:0859.0015: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  837. [   59.804599] usb 3-1: USB disconnect, device number 9
  838. [   62.384939] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  839. [   62.390931] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  840. [   62.417671] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  841. [   65.025481] usb 3-1: new full-speed USB device number 10 using xhci_hcd
  842. [   65.175850] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  843. [   65.175852] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  844. [   65.175853] usb 3-1: Product: TouchScreen
  845. [   65.175854] usb 3-1: Manufacturer: wch.cn
  846. [   65.175856] usb 3-1: SerialNumber: 9LQ0172005164
  847. [   65.219229] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0016/input/input22
  848. [   65.219389] hid-multitouch 0003:27C0:0859.0016: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  849. [   65.219947] hid-generic 0003:27C0:0859.0017: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  850. [   65.220969] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.0018/input/input23
  851. [   65.221085] hid-generic 0003:27C0:0859.0018: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  852. [   65.421481] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  853. [   65.829482] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  854. [   65.829485] [drm] This pclk is within the normal range.
  855. [   66.429509] [drm] set TPS3...
  856. [   67.144262] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  857. [   67.689139] Bluetooth: RFCOMM TTY layer initialized
  858. [   67.689147] Bluetooth: RFCOMM socket layer initialized
  859. [   67.689154] Bluetooth: RFCOMM ver 1.11
  860. [   68.501479] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  861. [   68.909481] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  862. [   68.909482] [drm] This pclk is within the normal range.
  863. [   69.509479] [drm] set TPS3...
  864. [   70.793483] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  865. [   71.201481] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  866. [   71.201482] [drm] This pclk is within the normal range.
  867. [   71.801479] [drm] set TPS3...
  868. [   73.085481] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  869. [   73.476961] usb 3-1: USB disconnect, device number 10
  870. [   73.901482] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  871. [   73.901484] [drm] This pclk is within the normal range.
  872. [   74.521479] [drm] No Dp device detected!
  873. [   78.157490] usb 3-1: new full-speed USB device number 11 using xhci_hcd
  874. [   78.307020] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  875. [   78.307023] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  876. [   78.307024] usb 3-1: Product: TouchScreen
  877. [   78.307025] usb 3-1: Manufacturer: wch.cn
  878. [   78.307026] usb 3-1: SerialNumber: 9LQ0172005164
  879. [   78.347228] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.0019/input/input24
  880. [   78.347381] hid-multitouch 0003:27C0:0859.0019: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  881. [   78.347946] hid-generic 0003:27C0:0859.001A: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  882. [   78.348979] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.001B/input/input25
  883. [   78.349098] hid-generic 0003:27C0:0859.001B: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  884. [   79.077481] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  885. [   79.485480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  886. [   79.485481] [drm] This pclk is within the normal range.
  887. [   80.085479] [drm] set TPS3...
  888. [   81.697480] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  889. [   81.808671] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
  890. [   82.109484] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  891. [   82.109486] [drm] This pclk is within the normal range.
  892. [   82.421835] usb 3-1: USB disconnect, device number 11
  893. [   87.097486] usb 3-1: new full-speed USB device number 12 using xhci_hcd
  894. [   87.247849] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  895. [   87.247851] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  896. [   87.247852] usb 3-1: Product: TouchScreen
  897. [   87.247853] usb 3-1: Manufacturer: wch.cn
  898. [   87.247854] usb 3-1: SerialNumber: 9LQ0172005164
  899. [   87.291222] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.001C/input/input26
  900. [   87.291378] hid-multitouch 0003:27C0:0859.001C: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  901. [   87.291945] hid-generic 0003:27C0:0859.001D: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  902. [   87.292973] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.001E/input/input27
  903. [   87.293091] hid-generic 0003:27C0:0859.001E: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  904. [   87.373482] [drm] set TPS3...
  905. [   89.253482] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  906. [   89.661480] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  907. [   89.661482] [drm] This pclk is within the normal range.
  908. [   90.261479] [drm] set TPS3...
  909. [   91.356257] usb 3-1: USB disconnect, device number 12
  910. [   91.541479] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  911. [   92.749481] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  912. [   92.749483] [drm] This pclk is within the normal range.
  913. [   93.509484] usb 3-1: new full-speed USB device number 13 using xhci_hcd
  914. [   93.649479] [drm] set TPS3...
  915. [   93.659018] usb 3-1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50
  916. [   93.659019] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  917. [   93.659021] usb 3-1: Product: TouchScreen
  918. [   93.659022] usb 3-1: Manufacturer: wch.cn
  919. [   93.659023] usb 3-1: SerialNumber: 9LQ0172005164
  920. [   93.739224] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.0/0003:27C0:0859.001F/input/input28
  921. [   93.739392] hid-multitouch 0003:27C0:0859.001F: input,hiddev0,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input0
  922. [   93.739947] hid-generic 0003:27C0:0859.0020: hiddev1,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-0000:00:19.0-1/input1
  923. [   93.740969] input: wch.cn TouchScreen as /devices/pci0000:00/0000:00:19.0/usb3/3-1/3-1:1.2/0003:27C0:0859.0021/input/input29
  924. [   93.741087] hid-generic 0003:27C0:0859.0021: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-0000:00:19.0-1/input2
  925. [   96.633483] [drm] LOONGGPU DC: write reg 400 failed, target value is 0, but read-back value is 4
  926. [   96.649478] [drm] LOONGGPU DC: write reg 400 failed, target value is 100104, but read-back value is 4
  927. [   97.041495] [drm] dp_phy_rate: 0, dp_phy_xlane: 1, dp_link_rate: 6 dp_pixclk: 65000
  928. [   97.041496] [drm] This pclk is within the normal range.
  929. [   97.641480] [drm] set TPS3...
  930. [   98.321480] [drm] dp_phy_rate: 0, dp_phy_xlane: 2, dp_link_rate: 6 dp_pixclk: 148500
  931. [   98.321481] [drm] This pclk is within the normal range.
  932. [   98.921479] [drm] set TPS3...
复制代码
回复

举报

杜比

27

主题

66

回帖

467

积分

超级版主

积分
467
 楼主| 发表于 昨天 10:51 | 显示全部楼层
实测，AOSC也支持一线通的功能
回复

举报

杜比

27

主题

66

回帖

467

积分

超级版主

积分
467
 楼主| 发表于 昨天 10:53 | 显示全部楼层
  1. [    0.000000] Linux version 6.17.7-aosc-main-16k (root@main-74df0967) (gcc (GCC) 14.3.0 20250523 (AOSC OS, Core), GNU ld (GNU Binutils) 2.45) #1 SMP PREEMPT_DYNAMIC Mon Dec  1 14:32:31 UTC 2025
  2. [    0.000000] Loongson-64bit Processor probed (LA364 Core)
  3. [    0.000000] CPU0 revision is: 0014b020 (Loongson-64bit)
  4. [    0.000000] FPU0 revision is: 00000001
  5. [    0.000000] efi: EFI v2.7 by EDK II
  6. [    0.000000] efi: ACPI 2.0=0xf9bef000 SMBIOS=0xfdec0000 SMBIOS 3.0=0xfdea0000 INITRD=0xf9be7e98 RNG=0xf9becf18 MEMRESERVE=0xf9be7098 MEMMAP=0xf9bea018
  7. [    0.000000] random: crng init done
  8. [    0.000000] ACPI: Early table checksum verification disabled
  9. [    0.000000] ACPI: RSDP 0x00000000F9BEF000 000024 (v02 LOONGS)
  10. [    0.000000] ACPI: XSDT 0x00000000F9BEE000 000064 (v01 LOONGS LOONGSON 00000002      01000013)
  11. [    0.000000] ACPI: FACP 0x00000000F9BC0000 0000F4 (v03 LOONGS LOONGSON 00000002 LIUX 01000013)
  12. [    0.000000] ACPI: DSDT 0x00000000F9B40000 0026E3 (v02 LOONGS LOONGSON 00000002 INTL 20240827)
  13. [    0.000000] ACPI: FACS 0x00000000F9BB0000 000040
  14. [    0.000000] ACPI: APIC 0x00000000F9BD0000 0000FA (v06 LOONGS LOONGSON 00000002 LIUX 01000013)
  15. [    0.000000] ACPI: MCFG 0x00000000F9BA0000 00003C (v01 LOONGS LOONGSON 00000001 LIUX 01000013)
  16. [    0.000000] ACPI: IVRS 0x00000000F9B90000 000050 (v01 LARCH  LOONGSON 00000001 LIUX 00000001)
  17. [    0.000000] ACPI: SRAT 0x00000000F9B80000 000100 (v02 LOONGS LOONGSON 00000002 LIUX 01000013)
  18. [    0.000000] ACPI: SLIT 0x00000000F9B70000 00002D (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
  19. [    0.000000] ACPI: VIAT 0x00000000F9B60000 00002C (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
  20. [    0.000000] ACPI: PPTT 0x00000000F9B50000 000164 (v03 LOONGS LOONGSON 00000002 LIUX 01000013)
  21. [    0.000000] SRAT: PXM 0 -> CPU 0x00 -> Node 0
  22. [    0.000000] SRAT: PXM 0 -> CPU 0x01 -> Node 0
  23. [    0.000000] SRAT: PXM 0 -> CPU 0x02 -> Node 0
  24. [    0.000000] SRAT: PXM 0 -> CPU 0x03 -> Node 0
  25. [    0.000000] SRAT: PXM 0 -> CPU 0x04 -> Node 0
  26. [    0.000000] SRAT: PXM 0 -> CPU 0x05 -> Node 0
  27. [    0.000000] SRAT: PXM 0 -> CPU 0x06 -> Node 0
  28. [    0.000000] SRAT: PXM 0 -> CPU 0x07 -> Node 0
  29. [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0fffffff]
  30. [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x90000000-0x43fffffff]
  31. [    0.000000] Node0: mem_type:2, mem_start:0x200000, mem_size:0x4490000 Bytes
  32. [    0.000000]        start_pfn:0x80, end_pfn:0x11a4, num_physpages:0x1124
  33. [    0.000000] Node0: mem_type:7, mem_start:0x4690000, mem_size:0xa770000 Bytes
  34. [    0.000000]        start_pfn:0x11a4, end_pfn:0x3b80, num_physpages:0x3b00
  35. [    0.000000] Resvd: mem_type:6, mem_start:0x10000000, mem_size:0x10000000 Bytes
  36. [    0.000000] Node0: mem_type:7, mem_start:0x90100000, mem_size:0x2ffc0000 Bytes
  37. [    0.000000]        start_pfn:0x24040, end_pfn:0x30030, num_physpages:0xfaf0
  38. [    0.000000] Node0: mem_type:4, mem_start:0xc00c0000, mem_size:0x280000 Bytes
  39. [    0.000000]        start_pfn:0x30030, end_pfn:0x300d0, num_physpages:0xfb90
  40. [    0.000000] Node0: mem_type:7, mem_start:0xc0340000, mem_size:0x32170000 Bytes
  41. [    0.000000]        start_pfn:0x300d0, end_pfn:0x3c92c, num_physpages:0x1c3ec
  42. [    0.000000] Node0: mem_type:2, mem_start:0xf24b0000, mem_size:0x5500000 Bytes
  43. [    0.000000]        start_pfn:0x3c92c, end_pfn:0x3de6c, num_physpages:0x1d92c
  44. [    0.000000] Node0: mem_type:7, mem_start:0xf79b0000, mem_size:0x8000 Bytes
  45. [    0.000000]        start_pfn:0x3de6c, end_pfn:0x3de6e, num_physpages:0x1d92e
  46. [    0.000000] Node0: mem_type:1, mem_start:0xf79b8000, mem_size:0x10af000 Bytes
  47. [    0.000000]        start_pfn:0x3de6e, end_pfn:0x3e299, num_physpages:0x1dd59
  48. [    0.000000] Node0: mem_type:2, mem_start:0xf8a67000, mem_size:0x10af000 Bytes
  49. [    0.000000]        start_pfn:0x3e299, end_pfn:0x3e6c5, num_physpages:0x1e184
  50. [    0.000000] Node0: mem_type:1, mem_start:0xf9b16000, mem_size:0x2a000 Bytes
  51. [    0.000000]        start_pfn:0x3e6c5, end_pfn:0x3e6d0, num_physpages:0x1e18e
  52. [    0.000000] Node0: mem_type:7, mem_start:0xf9be0000, mem_size:0x7000 Bytes
  53. [    0.000000]        start_pfn:0x3e6f8, end_pfn:0x3e6f9, num_physpages:0x1e18f
  54. [    0.000000] Node0: mem_type:2, mem_start:0xf9be7000, mem_size:0x1000 Bytes
  55. [    0.000000]        start_pfn:0x3e6f9, end_pfn:0x3e6fa, num_physpages:0x1e18f
  56. [    0.000000] Node0: mem_type:7, mem_start:0xf9be8000, mem_size:0x2000 Bytes
  57. [    0.000000]        start_pfn:0x3e6fa, end_pfn:0x3e6fa, num_physpages:0x1e18f
  58. [    0.000000] Node0: mem_type:9, mem_start:0xf9bea000, mem_size:0x1000 Bytes
  59. [    0.000000]        start_pfn:0x3e6fa, end_pfn:0x3e6fa, num_physpages:0x1e18f
  60. [    0.000000] Resvd: mem_type:9, mem_start:0xf9bea000, mem_size:0x1000 Bytes
  61. [    0.000000] Node0: mem_type:2, mem_start:0xf9beb000, mem_size:0x1000 Bytes
  62. [    0.000000]        start_pfn:0x3e6fa, end_pfn:0x3e6fb, num_physpages:0x1e18f
  63. [    0.000000] Node0: mem_type:9, mem_start:0xf9bec000, mem_size:0x1000 Bytes
  64. [    0.000000]        start_pfn:0x3e6fb, end_pfn:0x3e6fb, num_physpages:0x1e18f
  65. [    0.000000] Resvd: mem_type:9, mem_start:0xf9bec000, mem_size:0x1000 Bytes
  66. [    0.000000] Node0: mem_type:2, mem_start:0xf9bed000, mem_size:0x1000 Bytes
  67. [    0.000000]        start_pfn:0x3e6fb, end_pfn:0x3e6fb, num_physpages:0x1e18f
  68. [    0.000000] Node0: mem_type:9, mem_start:0xf9bee000, mem_size:0x2000 Bytes
  69. [    0.000000]        start_pfn:0x3e6fb, end_pfn:0x3e6fc, num_physpages:0x1e18f
  70. [    0.000000] Resvd: mem_type:9, mem_start:0xf9bee000, mem_size:0x2000 Bytes
  71. [    0.000000] Node0: mem_type:7, mem_start:0xf9bf0000, mem_size:0xdea000 Bytes
  72. [    0.000000]        start_pfn:0x3e6fc, end_pfn:0x3ea76, num_physpages:0x1e509
  73. [    0.000000] Node0: mem_type:4, mem_start:0xfa9da000, mem_size:0xe3000 Bytes
  74. [    0.000000]        start_pfn:0x3ea76, end_pfn:0x3eaaf, num_physpages:0x1e541
  75. [    0.000000] Node0: mem_type:7, mem_start:0xfaabd000, mem_size:0x18a000 Bytes
  76. [    0.000000]        start_pfn:0x3eaaf, end_pfn:0x3eb11, num_physpages:0x1e5a3
  77. [    0.000000] Node0: mem_type:4, mem_start:0xfac47000, mem_size:0x1000 Bytes
  78. [    0.000000]        start_pfn:0x3eb11, end_pfn:0x3eb12, num_physpages:0x1e5a3
  79. [    0.000000] Node0: mem_type:7, mem_start:0xfac48000, mem_size:0x2b000 Bytes
  80. [    0.000000]        start_pfn:0x3eb12, end_pfn:0x3eb1c, num_physpages:0x1e5ad
  81. [    0.000000] Node0: mem_type:4, mem_start:0xfac73000, mem_size:0x5e5000 Bytes
  82. [    0.000000]        start_pfn:0x3eb1c, end_pfn:0x3ec96, num_physpages:0x1e726
  83. [    0.000000] Node0: mem_type:7, mem_start:0xfb258000, mem_size:0x5ca000 Bytes
  84. [    0.000000]        start_pfn:0x3ec96, end_pfn:0x3ee08, num_physpages:0x1e898
  85. [    0.000000] Node0: mem_type:4, mem_start:0xfb822000, mem_size:0x13ce000 Bytes
  86. [    0.000000]        start_pfn:0x3ee08, end_pfn:0x3f2fc, num_physpages:0x1ed8b
  87. [    0.000000] Node0: mem_type:7, mem_start:0xfcbf0000, mem_size:0x4df000 Bytes
  88. [    0.000000]        start_pfn:0x3f2fc, end_pfn:0x3f433, num_physpages:0x1eec2
  89. [    0.000000] Node0: mem_type:3, mem_start:0xfd0cf000, mem_size:0xa21000 Bytes
  90. [    0.000000]        start_pfn:0x3f433, end_pfn:0x3f6bc, num_physpages:0x1f14a
  91. [    0.000000] Resvd: mem_type:5, mem_start:0xfdaf0000, mem_size:0x1c0000 Bytes
  92. [    0.000000] Resvd: mem_type:6, mem_start:0xfdcb0000, mem_size:0x400000 Bytes
  93. [    0.000000] Node0: mem_type:7, mem_start:0xfe0b0000, mem_size:0x22000 Bytes
  94. [    0.000000]        start_pfn:0x3f82c, end_pfn:0x3f834, num_physpages:0x1f152
  95. [    0.000000] Node0: mem_type:4, mem_start:0xfe0d2000, mem_size:0x21000 Bytes
  96. [    0.000000]        start_pfn:0x3f834, end_pfn:0x3f83c, num_physpages:0x1f15a
  97. [    0.000000] Node0: mem_type:3, mem_start:0xfe0f3000, mem_size:0x39000 Bytes
  98. [    0.000000]        start_pfn:0x3f83c, end_pfn:0x3f84b, num_physpages:0x1f168
  99. [    0.000000] Node0: mem_type:4, mem_start:0xfe12c000, mem_size:0xdc9000 Bytes
  100. [    0.000000]        start_pfn:0x3f84b, end_pfn:0x3fbbd, num_physpages:0x1f4da
  101. [    0.000000] Node0: mem_type:3, mem_start:0xfeef5000, mem_size:0x8000 Bytes
  102. [    0.000000]        start_pfn:0x3fbbd, end_pfn:0x3fbbf, num_physpages:0x1f4dc
  103. [    0.000000] Node0: mem_type:4, mem_start:0xfeefd000, mem_size:0xd8000 Bytes
  104. [    0.000000]        start_pfn:0x3fbbf, end_pfn:0x3fbf5, num_physpages:0x1f512
  105. [    0.000000] Node0: mem_type:3, mem_start:0xfefd5000, mem_size:0x29000 Bytes
  106. [    0.000000]        start_pfn:0x3fbf5, end_pfn:0x3fbff, num_physpages:0x1f51c
  107. [    0.000000] Node0: mem_type:4, mem_start:0xfeffe000, mem_size:0x2000 Bytes
  108. [    0.000000]        start_pfn:0x3fbff, end_pfn:0x3fc00, num_physpages:0x1f51c
  109. [    0.000000] Node0: mem_type:7, mem_start:0xff000000, mem_size:0x33eb00000 Bytes
  110. [    0.000000]        start_pfn:0x3fc00, end_pfn:0x10f6c0, num_physpages:0xeefdc
  111. [    0.000000] Node0: mem_type:1, mem_start:0x43db00000, mem_size:0x2500000 Bytes
  112. [    0.000000]        start_pfn:0x10f6c0, end_pfn:0x110000, num_physpages:0xef91c
  113. [    0.000000] Resvd: mem_type:0, mem_start:0xee00000, mem_size:0x1200000 Bytes
  114. [    0.000000] Resvd: mem_type:0, mem_start:0x90000000, mem_size:0x100000 Bytes
  115. [    0.000000] Node0's addrspace_offset is 0x0
  116. [    0.000000] Node0: start_pfn=0x80, end_pfn=0x110000
  117. [    0.000000] NODE_DATA(0) allocated [mem 0x43fff7dc0-0x43fffbfff]
  118. [    0.000000] SMBIOS 3.2.0 present.
  119. [    0.000000] DMI: Loongson Loongson-3B6000M-EVB/EVB, BIOS UDK_3B6000M_NUC_V0.41_1013A 10/14/25 09:23:49
  120. [    0.000000] DMI: Memory slots populated: 1/1
  121. [    0.000000] CpuClock = 2500000000
  122. [    0.000000] The BIOS Version: UDK_3B6000M_NUC_V0.41_1013A
  123. [    0.000000] software IO TLB: area num 8.
  124. [    0.000000] software IO TLB: mapped [mem 0x0000000004690000-0x0000000008690000] (64MB)
  125. [    0.000000] PM: hibernation: Registered nosave memory: [mem 0x036e0000-0x036e3fff]
  126. [    0.000000] Detected 8 available CPU(s)
  127. [    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
  128. [    0.000000] Zone ranges:
  129. [    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
  130. [    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fffffff]
  131. [    0.000000]   Device   empty
  132. [    0.000000] Movable zone start for each node
  133. [    0.000000] Early memory node ranges
  134. [    0.000000]   node   0: [mem 0x0000000000200000-0x000000000edfffff]
  135. [    0.000000]   node   0: [mem 0x0000000090100000-0x00000000f9b3ffff]
  136. [    0.000000]   node   0: [mem 0x00000000f9be0000-0x00000000fdaeffff]
  137. [    0.000000]   node   0: [mem 0x00000000fe0b0000-0x000000043fffffff]
  138. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000043fffffff]
  139. [    0.000000] On node 0, zone DMA32: 128 pages in unavailable ranges
  140. [    0.000000] On node 0, zone DMA32: 33984 pages in unavailable ranges
  141. [    0.000000] On node 0, zone DMA32: 40 pages in unavailable ranges
  142. [    0.000000] On node 0, zone DMA32: 368 pages in unavailable ranges
  143. [    0.000000] percpu: Embedded 14 pages/cpu s97240 r8192 d123944 u4194304
  144. [    0.000000] pcpu-alloc: s97240 r8192 d123944 u4194304 alloc=1*33554432
  145. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  146. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.17.7-aosc-main-16k root=UUID=0670ffaf-1355-445e-86d4-4ce11784ba66 quiet rd.auto rd.auto=1 splash
  147. [    0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
  148. [    0.000000] printk: log_buf_len individual max cpu contribution: 262144 bytes
  149. [    0.000000] printk: log_buf_len total cpu_extra contributions: 1835008 bytes
  150. [    0.000000] printk: log_buf_len min size: 262144 bytes
  151. [    0.000000] printk: log buffer data + meta data: 2097152 + 7340032 = 9437184 bytes
  152. [    0.000000] printk: early log buf free: 251632(95%)
  153. [    0.000000] Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes, linear)
  154. [    0.000000] Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
  155. [    0.000000] Fallback order for Node 0: 0
  156. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 981288
  157. [    0.000000] Policy zone: Normal
  158. [    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  159. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  160. [    0.000000] ftrace: allocating 64541 entries in 64 pages
  161. [    0.000000] ftrace: allocated 64 pages with 1 groups
  162. [    0.000000] Dynamic Preempt: lazy
  163. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  164. [    0.000000] rcu:         RCU event tracing is enabled.
  165. [    0.000000] rcu:         RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=8.
  166. [    0.000000] rcu:         RCU debug extended QS entry/exit.
  167. [    0.000000]         Trampoline variant of Tasks RCU enabled.
  168. [    0.000000]         Rude variant of Tasks RCU enabled.
  169. [    0.000000]         Tracing variant of Tasks RCU enabled.
  170. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
  171. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  172. [    0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  173. [    0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  174. [    0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  175. [    0.000000] NR_IRQS: 526400, nr_irqs: 320, preallocated irqs: 16
  176. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  177. [    0.000000] Constant clock event device register
  178. [    0.000000] clocksource: Constant: mask: 0xffffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
  179. [    0.000000] sched_clock: 64 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
  180. [    0.000002] Constant clock source device register
  181. [    0.000165] Console: colour dummy device 80x25
  182. [    0.000171] printk: legacy console [tty0] enabled
  183. [    0.000324] ACPI: Core revision 20250404
  184. [    0.001451] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=100000)
  185. [    0.001459] pid_max: default: 32768 minimum: 301
  186. [    0.001576] LSM: initializing lsm=lockdown,capability,landlock,apparmor,ipe,bpf,ima,evm
  187. [    0.001673] landlock: Up and running.
  188. [    0.001787] AppArmor: AppArmor initialized
  189. [    0.001914] LSM support for eBPF active
  190. [    0.002039] Mount-cache hash table entries: 32768 (order: 4, 262144 bytes, linear)
  191. [    0.002068] Mountpoint-cache hash table entries: 32768 (order: 4, 262144 bytes, linear)
  192. [    0.003279] rcu: Hierarchical SRCU implementation.
  193. [    0.003283] rcu:         Max phase no-delay instances is 400.
  194. [    0.003360] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  195. [    0.003735] smp: Bringing up secondary CPUs ...
  196. [    0.003887] Booting CPU#1...
  197. [    0.003916] Loongson-64bit Processor probed (LA364 Core)
  198. [    0.003919] CPU1 revision is: 0014b020 (Loongson-64bit)
  199. [    0.003920] FPU1 revision is: 00000001
  200. [    0.003930] CPU#1 finished
  201. [    0.004132] Booting CPU#2...
  202. [    0.004148] Loongson-64bit Processor probed (LA364 Core)
  203. [    0.004151] CPU2 revision is: 0014b020 (Loongson-64bit)
  204. [    0.004153] FPU2 revision is: 00000001
  205. [    0.004163] CPU#2 finished
  206. [    0.004338] Booting CPU#3...
  207. [    0.004353] Loongson-64bit Processor probed (LA364 Core)
  208. [    0.004355] CPU3 revision is: 0014b020 (Loongson-64bit)
  209. [    0.004357] FPU3 revision is: 00000001
  210. [    0.004363] CPU#3 finished
  211. [    0.004530] Booting CPU#4...
  212. [    0.004543] Loongson-64bit Processor probed (LA364 Core)
  213. [    0.004547] CPU4 revision is: 0014b020 (Loongson-64bit)
  214. [    0.004548] FPU4 revision is: 00000001
  215. [    0.004556] CPU#4 finished
  216. [    0.004742] Booting CPU#5...
  217. [    0.004757] Loongson-64bit Processor probed (LA364 Core)
  218. [    0.004760] CPU5 revision is: 0014b020 (Loongson-64bit)
  219. [    0.004761] FPU5 revision is: 00000001
  220. [    0.004768] CPU#5 finished
  221. [    0.004949] Booting CPU#6...
  222. [    0.004963] Loongson-64bit Processor probed (LA364 Core)
  223. [    0.004966] CPU6 revision is: 0014b020 (Loongson-64bit)
  224. [    0.004968] FPU6 revision is: 00000001
  225. [    0.004974] CPU#6 finished
  226. [    0.005145] Booting CPU#7...
  227. [    0.005159] Loongson-64bit Processor probed (LA364 Core)
  228. [    0.005162] CPU7 revision is: 0014b020 (Loongson-64bit)
  229. [    0.005164] FPU7 revision is: 00000001
  230. [    0.005171] CPU#7 finished
  231. [    0.005207] smp: Brought up 1 node, 8 CPUs
  232. [    0.011642] node 0 deferred pages initialised in 6ms
  233. [    0.011673] Memory: 15326144K/15700608K available (25856K kernel code, 14610K rwdata, 26536K rodata, 1600K init, 1438K bss, 357952K reserved, 0K cma-reserved)
  234. [    0.012032] devtmpfs: initialized
  235. [    0.013099] Performance counters: loongarch/loongson64 PMU enabled, 4 64-bit counters available to each CPU.
  236. [    0.013370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  237. [    0.013386] posixtimers hash table entries: 4096 (order: 2, 65536 bytes, linear)
  238. [    0.013405] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
  239. [    0.013578] pinctrl core: initialized pinctrl subsystem
  240. [    0.013934] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  241. [    0.014173] audit: initializing netlink subsys (disabled)
  242. [    0.014225] audit: type=2000 audit(0.015:1): state=initialized audit_enabled=0 res=1
  243. [    0.014380] thermal_sys: Registered thermal governor 'fair_share'
  244. [    0.014383] thermal_sys: Registered thermal governor 'bang_bang'
  245. [    0.014385] thermal_sys: Registered thermal governor 'step_wise'
  246. [    0.014387] thermal_sys: Registered thermal governor 'user_space'
  247. [    0.014389] thermal_sys: Registered thermal governor 'power_allocator'
  248. [    0.014435] Final SIMD width = 128
  249. [    0.014488] hw-breakpoint: Found 4 breakpoint and 2 watchpoint registers.
  250. [    0.014528] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  251. [    0.015153] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  252. [    0.015156] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  253. [    0.032002] raid6: lsx      gen()  7031 MB/s
  254. [    0.049006] raid6: int64x8  gen()  2835 MB/s
  255. [    0.065991] raid6: int64x4  gen()  3251 MB/s
  256. [    0.083020] raid6: int64x2  gen()  2712 MB/s
  257. [    0.099994] raid6: int64x1  gen()  2373 MB/s
  258. [    0.099996] raid6: using algorithm lsx gen() 7031 MB/s
  259. [    0.116993] raid6: .... xor() 4236 MB/s, rmw enabled
  260. [    0.116995] raid6: using lsx recovery algorithm
  261. [    0.117152] ACPI: Added _OSI(Module Device)
  262. [    0.117154] ACPI: Added _OSI(Processor Device)
  263. [    0.117157] ACPI: Added _OSI(Processor Aggregator Device)
  264. [    0.121092] ACPI: 1 ACPI AML tables successfully acquired and loaded
  265. [    0.125903] ACPI: Interpreter enabled
  266. [    0.125925] ACPI: PM: (supports S0 S3 S4 S5)
  267. [    0.125928] ACPI: Using LPIC for interrupt routing
  268. [    0.126234] ACPI: MCFG table detected, 1 entries
  269. [    0.126747] ACPI: \_SB_.PCI0.PCIB.XHCI.PUBS: New power resource
  270. [    0.130106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  271. [    0.130115] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
  272. [    0.130124] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
  273. [    0.130127] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
  274. [    0.130130] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
  275. [    0.130133] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xfe00000000-0xfe0fffffff] for [bus 00-ff] with loongson_pci_ecam_ops
  276. [    0.130148] acpi PNP0A08:00: ECAM at [mem 0xfe00000000-0xfe1fffffff] for [bus 00-ff]
  277. [    0.130168] ACPI: Remapped I/O 0x0000000018000000 to [io  0x0000-0xffff window]
  278. [    0.130370] PCI host bridge to bus 0000:00
  279. [    0.130398] pci_bus 0000:00: root bus resource [io  0x0000-0xffff window]
  280. [    0.130402] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff window]
  281. [    0.130405] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7cffffffff window]
  282. [    0.130408] pci_bus 0000:00: root bus resource [bus 00-ff]
  283. [    0.130484] pci 0000:00:03.0: [0014:7a23] type 00 class 0x020000 conventional PCI endpoint
  284. [    0.130499] pci 0000:00:03.0: BAR 0 [mem 0x4041248000-0x404124ffff 64bit]
  285. [    0.130631] pci 0000:00:03.1: [0014:7a23] type 00 class 0x020000 conventional PCI endpoint
  286. [    0.130644] pci 0000:00:03.1: BAR 0 [mem 0x4041240000-0x4041247fff 64bit]
  287. [    0.130744] pci 0000:00:04.0: [0014:7a44] type 00 class 0x0c0330 conventional PCI endpoint
  288. [    0.130757] pci 0000:00:04.0: BAR 0 [mem 0x4041100000-0x40411fffff 64bit]
  289. [    0.130854] pci 0000:00:06.0: [0014:7a35] type 00 class 0x040000 conventional PCI endpoint
  290. [    0.130869] pci 0000:00:06.0: BAR 0 [mem 0x404125c000-0x404125c0ff 64bit]
  291. [    0.130872] pci 0000:00:06.0: BAR 2 [mem 0x4000000000-0x403fffffff 64bit]
  292. [    0.130874] pci 0000:00:06.0: BAR 4 [mem 0x4041230000-0x404123ffff 64bit]
  293. [    0.130922] pci 0000:00:06.1: [0014:7a46] type 00 class 0x030000 conventional PCI endpoint
  294. [    0.130936] pci 0000:00:06.1: BAR 0 [mem 0x4041220000-0x404122ffff 64bit]
  295. [    0.130938] pci 0000:00:06.1: BAR 2 [mem 0x40210000-0x402100ff]
  296. [    0.130996] pci 0000:00:06.2: [0014:7a37] type 00 class 0x040300 conventional PCI endpoint
  297. [    0.131009] pci 0000:00:06.2: BAR 0 [mem 0x4041210000-0x404121ffff 64bit]
  298. [    0.131059] pci 0000:00:06.3: [0014:7a56] type 00 class 0x048000 conventional PCI endpoint
  299. [    0.131072] pci 0000:00:06.3: BAR 0 [mem 0x4041254000-0x4041257fff 64bit]
  300. [    0.131119] pci 0000:00:06.4: [0014:7a66] type 00 class 0x048000 conventional PCI endpoint
  301. [    0.131133] pci 0000:00:06.4: BAR 0 [mem 0x4041250000-0x4041253fff 64bit]
  302. [    0.131137] pci 0000:00:06.4: ROM [mem 0xfffff800-0xffffffff pref]
  303. [    0.131189] pci 0000:00:07.0: [0014:7a07] type 00 class 0x040300 conventional PCI endpoint
  304. [    0.131202] pci 0000:00:07.0: BAR 0 [mem 0x4041200000-0x404120ffff 64bit]
  305. [    0.131259] pci 0000:00:09.0: [0014:7a99] type 01 class 0x060400 PCIe Root Port
  306. [    0.131268] pci 0000:00:09.0: BAR 0 [mem 0x404125b000-0x404125bfff 64bit]
  307. [    0.131271] pci 0000:00:09.0: PCI bridge to [bus 01-03]
  308. [    0.131275] pci 0000:00:09.0:   bridge window [mem 0x40100000-0x401fffff]
  309. [    0.131300] pci 0000:00:09.0: supports D1 D2
  310. [    0.131303] pci 0000:00:09.0: PME# supported from D0 D1 D3hot D3cold
  311. [    0.131389] pci 0000:00:0d.0: [0014:7a99] type 01 class 0x060400 PCIe Root Port
  312. [    0.131399] pci 0000:00:0d.0: BAR 0 [mem 0x404125a000-0x404125afff 64bit]
  313. [    0.131403] pci 0000:00:0d.0: PCI bridge to [bus 04]
  314. [    0.131406] pci 0000:00:0d.0:   bridge window [io  0x2000-0x2fff]
  315. [    0.131409] pci 0000:00:0d.0:   bridge window [mem 0x40000000-0x400fffff]
  316. [    0.131443] pci 0000:00:0d.0: supports D1 D2
  317. [    0.131445] pci 0000:00:0d.0: PME# supported from D0 D1 D3hot D3cold
  318. [    0.131530] pci 0000:00:0e.0: [0014:7a89] type 01 class 0x060400 PCIe Root Port
  319. [    0.131541] pci 0000:00:0e.0: BAR 0 [mem 0x4041259000-0x4041259fff 64bit]
  320. [    0.131544] pci 0000:00:0e.0: PCI bridge to [bus 05]
  321. [    0.131579] pci 0000:00:0e.0: supports D1 D2
  322. [    0.131581] pci 0000:00:0e.0: PME# supported from D0 D1 D3hot D3cold
  323. [    0.131680] pci 0000:00:16.0: [0014:7a1b] type 00 class 0x088000 conventional PCI endpoint
  324. [    0.131692] pci 0000:00:16.0: BAR 0 [mem 0x4041258000-0x4041258fff 64bit]
  325. [    0.131696] pci 0000:00:16.0: BAR 2 [mem 0x4040000000-0x4040ffffff 64bit]
  326. [    0.131754] pci 0000:00:19.0: [0014:7a34] type 00 class 0x0c0330 conventional PCI endpoint
  327. [    0.131767] pci 0000:00:19.0: BAR 0 [mem 0x4041000000-0x40410fffff 64bit]
  328. [    0.131870] pci 0000:01:00.0: [1fa0:2283] type 00 class 0x010802 PCIe Endpoint
  329. [    0.131907] pci 0000:01:00.0: BAR 0 [mem 0x40100000-0x40103fff 64bit]
  330. [    0.131914] pci 0000:01:00.0: ROM [mem 0xffff0000-0xffffffff pref]
  331. [    0.132016] pci 0000:01:00.0: VF BAR 0 [mem 0x40100000-0x4010ffff 64bit]
  332. [    0.132020] pci 0000:01:00.0: VF BAR 0 [mem 0x40100000-0x401fffff 64bit]: contains BAR 0 for 16 VFs
  333. [    0.134071] pci 0000:04:00.0: [10ec:b852] type 00 class 0x028000 PCIe Endpoint
  334. [    0.134165] pci 0000:04:00.0: BAR 0 [io  0x2000-0x20ff]
  335. [    0.134175] pci 0000:04:00.0: BAR 2 [mem 0x40000000-0x400fffff 64bit]
  336. [    0.134335] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
  337. [    0.136054] pci 0000:00:09.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01-03] add_size 100000 add_align 100000
  338. [    0.136078] pci 0000:00:06.0: BAR 2 [mem 0x4000000000-0x403fffffff 64bit]: assigned
  339. [    0.136084] pci 0000:00:16.0: BAR 2 [mem 0x4040000000-0x4040ffffff 64bit]: assigned
  340. [    0.136088] pci 0000:00:04.0: BAR 0 [mem 0x4041000000-0x40410fffff 64bit]: assigned
  341. [    0.136093] pci 0000:00:09.0: bridge window [mem 0x40000000-0x401fffff]: assigned
  342. [    0.136095] pci 0000:00:0d.0: bridge window [mem 0x40200000-0x402fffff]: assigned
  343. [    0.136098] pci 0000:00:19.0: BAR 0 [mem 0x4041100000-0x40411fffff 64bit]: assigned
  344. [    0.136102] pci 0000:00:06.0: BAR 4 [mem 0x4041200000-0x404120ffff 64bit]: assigned
  345. [    0.136107] pci 0000:00:06.1: BAR 0 [mem 0x4041210000-0x404121ffff 64bit]: assigned
  346. [    0.136111] pci 0000:00:06.2: BAR 0 [mem 0x4041220000-0x404122ffff 64bit]: assigned
  347. [    0.136116] pci 0000:00:07.0: BAR 0 [mem 0x4041230000-0x404123ffff 64bit]: assigned
  348. [    0.136120] pci 0000:00:03.0: BAR 0 [mem 0x4041240000-0x4041247fff 64bit]: assigned
  349. [    0.136124] pci 0000:00:03.1: BAR 0 [mem 0x4041248000-0x404124ffff 64bit]: assigned
  350. [    0.136128] pci 0000:00:06.3: BAR 0 [mem 0x4041250000-0x4041253fff 64bit]: assigned
  351. [    0.136133] pci 0000:00:06.4: BAR 0 [mem 0x4041254000-0x4041257fff 64bit]: assigned
  352. [    0.136138] pci 0000:00:09.0: BAR 0 [mem 0x4041258000-0x4041258fff 64bit]: assigned
  353. [    0.136142] pci 0000:00:0d.0: BAR 0 [mem 0x4041259000-0x4041259fff 64bit]: assigned
  354. [    0.136147] pci 0000:00:0d.0: bridge window [io  0x4000-0x4fff]: assigned
  355. [    0.136149] pci 0000:00:0e.0: BAR 0 [mem 0x404125a000-0x404125afff 64bit]: assigned
  356. [    0.136154] pci 0000:00:16.0: BAR 0 [mem 0x404125b000-0x404125bfff 64bit]: assigned
  357. [    0.136158] pci 0000:00:06.4: ROM [mem 0x40300000-0x403007ff pref]: assigned
  358. [    0.136161] pci 0000:00:06.0: BAR 0 [mem 0x404125c000-0x404125c0ff 64bit]: assigned
  359. [    0.136165] pci 0000:00:06.1: BAR 2 [mem 0x40300800-0x403008ff]: assigned
  360. [    0.136173] pci 0000:01:00.0: ROM [mem 0x40000000-0x4000ffff pref]: assigned
  361. [    0.136176] pci 0000:01:00.0: VF BAR 0 [mem 0x40010000-0x4010ffff 64bit]: assigned
  362. [    0.136181] pci 0000:01:00.0: BAR 0 [mem 0x40110000-0x40113fff 64bit]: assigned
  363. [    0.136190] pci 0000:00:09.0: PCI bridge to [bus 01-03]
  364. [    0.136193] pci 0000:00:09.0:   bridge window [mem 0x40000000-0x401fffff]
  365. [    0.136198] pci 0000:04:00.0: BAR 2 [mem 0x40200000-0x402fffff 64bit]: assigned
  366. [    0.136217] pci 0000:04:00.0: BAR 0 [io  0x4000-0x40ff]: assigned
  367. [    0.136224] pci 0000:00:0d.0: PCI bridge to [bus 04]
  368. [    0.136226] pci 0000:00:0d.0:   bridge window [io  0x4000-0x4fff]
  369. [    0.136230] pci 0000:00:0d.0:   bridge window [mem 0x40200000-0x402fffff]
  370. [    0.136234] pci 0000:00:0e.0: PCI bridge to [bus 05]
  371. [    0.136239] pci_bus 0000:00: resource 4 [io  0x0000-0xffff window]
  372. [    0.136242] pci_bus 0000:00: resource 5 [mem 0x40000000-0x7fffffff window]
  373. [    0.136244] pci_bus 0000:00: resource 6 [mem 0x4000000000-0x7cffffffff window]
  374. [    0.136247] pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff]
  375. [    0.136249] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
  376. [    0.136251] pci_bus 0000:04: resource 1 [mem 0x40200000-0x402fffff]
  377. [    0.137311] iommu: Default domain type: Translated
  378. [    0.137314] iommu: DMA domain TLB invalidation policy: strict mode
  379. [    0.137756] SCSI subsystem initialized
  380. [    0.137798] libata version 3.00 loaded.
  381. [    0.137836] ACPI: bus type USB registered
  382. [    0.137861] usbcore: registered new interface driver usbfs
  383. [    0.137873] usbcore: registered new interface driver hub
  384. [    0.137883] usbcore: registered new device driver usb
  385. [    0.137915] pps_core: LinuxPPS API ver. 1 registered
  386. [    0.137917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  387. [    0.137922] PTP clock support registered
  388. [    0.138055] efivars: Registered efivars operations
  389. [    0.138461] NetLabel: Initializing
  390. [    0.138464] NetLabel:  domain hash size = 128
  391. [    0.138466] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  392. [    0.138488] NetLabel:  unlabeled traffic allowed by default
  393. [    0.138494] mctp: management component transport protocol core
  394. [    0.138496] NET: Registered PF_MCTP protocol family
  395. [    0.138598] pci 0000:00:06.1: vgaarb: setting as boot VGA device
  396. [    0.138601] pci 0000:00:06.1: vgaarb: bridge control possible
  397. [    0.138603] pci 0000:00:06.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  398. [    0.138609] vgaarb: loaded
  399. [    0.138759] clocksource: Switched to clocksource Constant
  400. [    0.140055] VFS: Disk quotas dquot_6.6.0
  401. [    0.140076] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
  402. [    0.140327] AppArmor: AppArmor Filesystem Enabled
  403. [    0.140359] pnp: PnP ACPI init
  404. [    0.140739] pnp: PnP ACPI: found 8 devices
  405. [    0.143278] NET: Registered PF_INET protocol family
  406. [    0.143509] IP idents hash table entries: 262144 (order: 7, 2097152 bytes, linear)
  407. [    0.162947] tcp_listen_portaddr_hash hash table entries: 8192 (order: 3, 131072 bytes, linear)
  408. [    0.162988] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
  409. [    0.163054] TCP established hash table entries: 131072 (order: 6, 1048576 bytes, linear)
  410. [    0.163434] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
  411. [    0.163617] TCP: Hash tables configured (established 131072 bind 65536)
  412. [    0.163748] MPTCP token hash table entries: 16384 (order: 4, 393216 bytes, linear)
  413. [    0.163865] UDP hash table entries: 8192 (order: 5, 524288 bytes, linear)
  414. [    0.163964] UDP-Lite hash table entries: 8192 (order: 5, 524288 bytes, linear)
  415. [    0.164099] NET: Registered PF_UNIX/PF_LOCAL protocol family
  416. [    0.164111] NET: Registered PF_XDP protocol family
  417. [    0.164165] PCI: CLS 0 bytes, default 64
  418. [    0.164239] kvm [1]: Hardware virtualization not available
  419. [    0.164296] Trying to unpack rootfs image as initramfs...
  420. [    0.171277] Initialise system trusted keyrings
  421. [    0.171358] workingset: timestamp_bits=40 max_order=20 bucket_order=0
  422. [    0.172010] ntfs3: Enabled Linux POSIX ACLs support
  423. [    0.172013] ntfs3: Read-only LZX/Xpress compression included
  424. [    0.172117] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
  425. [    0.173616] cryptd: max_cpu_qlen set to 1000
  426. [    0.188282] NET: Registered PF_ALG protocol family
  427. [    0.188308] xor: measuring software checksum speed
  428. [    0.188568]    8regs           : 12750 MB/sec
  429. [    0.188875]    8regs_prefetch  : 10759 MB/sec
  430. [    0.189156]    32regs          : 11754 MB/sec
  431. [    0.189459]    32regs_prefetch : 10895 MB/sec
  432. [    0.189730]    lsx             : 12169 MB/sec
  433. [    0.189732] xor: using function: 8regs (12750 MB/sec)
  434. [    0.189739] async_tx: api initialized (async)
  435. [    0.189744] Key type asymmetric registered
  436. [    0.189746] Asymmetric key parser 'x509' registered
  437. [    0.189748] Asymmetric key parser 'pkcs8' registered
  438. [    0.189750] Key type pkcs7_test registered
  439. [    0.189787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  440. [    0.189850] io scheduler mq-deadline registered
  441. [    0.189853] io scheduler kyber registered
  442. [    0.189873] io scheduler bfq registered
  443. [    0.192788] ledtrig-cpu: registered to indicate activity on CPUs
  444. [    0.193526] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  445. [    0.194433] ACPI: button: Power Button [PWRF]
  446. [    0.211077] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  447. [    0.211190] 00:00: ttyS0 at MMIO 0x1fe001e0 (irq = 35, base_baud = 6250000) is a 8250
  448. [    0.211422] 00:01: ttyS1 at MMIO 0x10100000 (irq = 36, base_baud = 3125000) is a 8250
  449. [    0.211611] 00:02: ttyS2 at MMIO 0x10100100 (irq = 36, base_baud = 3125000) is a 8250
  450. [    0.211806] 00:03: ttyS3 at MMIO 0x10100200 (irq = 36, base_baud = 3125000) is a 8250
  451. [    0.211987] 00:04: ttyS4 at MMIO 0x10100300 (irq = 36, base_baud = 3125000) is a 8250
  452. [    0.212173] 00:05: ttyS5 at MMIO 0x10100400 (irq = 36, base_baud = 3125000) is a 8250
  453. [    0.212356] 00:06: ttyS6 at MMIO 0x10100500 (irq = 36, base_baud = 3125000) is a 8250
  454. [    0.212540] 00:07: ttyS7 at MMIO 0x10100600 (irq = 36, base_baud = 3125000) is a 8250
  455. [    0.212924] ACPI: bus type drm_connector registered
  456. [    0.213211] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
  457. [    0.213215] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
  458. [    0.213936] fbcon: Deferring console take-over
  459. [    0.213940] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
  460. [    0.216994] loop: module loaded
  461. [    0.217251] Key type psk registered
  462. [    0.218471] PDC20230-C/20630 VLB ATA controller detected.
  463. [    0.218771] nvme nvme0: pci function 0000:01:00.0
  464. [    0.219018] sky2: driver version 1.30
  465. [    0.219454] dwmac-loongson-pci 0000:00:03.0: User ID: 0xd1, Synopsys ID: 0x12
  466. [    0.219461] dwmac-loongson-pci 0000:00:03.0: DMA HW capability register supported
  467. [    0.219463] dwmac-loongson-pci 0000:00:03.0: RX Checksum Offload Engine supported
  468. [    0.219465] dwmac-loongson-pci 0000:00:03.0: COE Type 2
  469. [    0.219467] dwmac-loongson-pci 0000:00:03.0: TX Checksum insertion supported
  470. [    0.219469] dwmac-loongson-pci 0000:00:03.0: Wake-Up On Lan supported
  471. [    0.219472] dwmac-loongson-pci 0000:00:03.0: Enhanced/Alternate descriptors
  472. [    0.219474] dwmac-loongson-pci 0000:00:03.0: Enabled extended descriptors
  473. [    0.219475] dwmac-loongson-pci 0000:00:03.0: Ring mode enabled
  474. [    0.219477] dwmac-loongson-pci 0000:00:03.0: Enable RX Mitigation via HW Watchdog Timer
  475. [    0.219481] dwmac-loongson-pci 0000:00:03.0: device MAC address d2:ad:53:ed:a8:dc
  476. [    0.224969] nvme nvme0: missing or invalid SUBNQN field.
  477. [    0.319924] hwmon hwmon0: temp1_input not attached to any thermal zone
  478. [    0.319935] hwmon hwmon0: temp2_input not attached to any thermal zone
  479. [    0.332294] nvme nvme0: allocated 128 MiB host memory buffer (2 segments).
  480. [    0.338137] nvme nvme0: 8/0/0 default/read/poll queues
  481. [    0.341518]  nvme0n1: p1 p2
  482. [    1.710872] Freeing initrd memory: 87008K
  483. [    1.712847] motorcomm: module verification failed: signature and/or required key missing - tainting kernel
  484. [    1.724244] YT8531 Gigabit Ethernet stmmac-18:00: attached PHY driver (mii_bus:phy_addr=stmmac-18:00, irq=POLL)
  485. [    1.724252] YT8531 Gigabit Ethernet stmmac-18:01: attached PHY driver (mii_bus:phy_addr=stmmac-18:01, irq=POLL)
  486. [    1.725040] dwmac-loongson-pci 0000:00:03.1: User ID: 0xd1, Synopsys ID: 0x12
  487. [    1.725048] dwmac-loongson-pci 0000:00:03.1: DMA HW capability register supported
  488. [    1.725051] dwmac-loongson-pci 0000:00:03.1: RX Checksum Offload Engine supported
  489. [    1.725053] dwmac-loongson-pci 0000:00:03.1: COE Type 2
  490. [    1.725055] dwmac-loongson-pci 0000:00:03.1: TX Checksum insertion supported
  491. [    1.725057] dwmac-loongson-pci 0000:00:03.1: Wake-Up On Lan supported
  492. [    1.725059] dwmac-loongson-pci 0000:00:03.1: Enhanced/Alternate descriptors
  493. [    1.725061] dwmac-loongson-pci 0000:00:03.1: Enabled extended descriptors
  494. [    1.725063] dwmac-loongson-pci 0000:00:03.1: Ring mode enabled
  495. [    1.725065] dwmac-loongson-pci 0000:00:03.1: Enable RX Mitigation via HW Watchdog Timer
  496. [    1.725068] dwmac-loongson-pci 0000:00:03.1: device MAC address fa:be:02:62:45:64
  497. [    1.737178] YT8531 Gigabit Ethernet stmmac-19:00: attached PHY driver (mii_bus:phy_addr=stmmac-19:00, irq=POLL)
  498. [    1.737183] YT8531 Gigabit Ethernet stmmac-19:01: attached PHY driver (mii_bus:phy_addr=stmmac-19:01, irq=POLL)
  499. [    1.737567] Fusion MPT base driver 3.04.20
  500. [    1.737570] Copyright (c) 1999-2008 LSI Corporation
  501. [    1.737577] Fusion MPT SAS Host driver 3.04.20
  502. [    1.737608] Fusion MPT misc device (ioctl) driver 3.04.20
  503. [    1.737667] mptctl: Registered with Fusion MPT base driver
  504. [    1.737670] mptctl: /dev/mptctl @ (major,minor=10,220)
  505. [    1.737939] xhci_hcd 0000:00:04.0: xHCI Host Controller
  506. [    1.737993] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
  507. [    1.738150] xhci_hcd 0000:00:04.0: USB3 root hub has no ports
  508. [    1.738156] xhci_hcd 0000:00:04.0: hcc params 0x0230fe6d hci version 0x110 quirks 0x0000000000000010
  509. [    1.738246] xhci_hcd 0000:00:04.0: xHCI Host Controller
  510. [    1.738288] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
  511. [    1.738293] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
  512. [    1.738383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17
  513. [    1.738387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  514. [    1.738390] usb usb1: Product: xHCI Host Controller
  515. [    1.738392] usb usb1: Manufacturer: Linux 6.17.7-aosc-main-16k xhci-hcd
  516. [    1.738394] usb usb1: SerialNumber: 0000:00:04.0
  517. [    1.738555] hub 1-0:1.0: USB hub found
  518. [    1.738571] hub 1-0:1.0: 4 ports detected
  519. [    1.739127] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  520. [    1.739178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17
  521. [    1.739181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  522. [    1.739183] usb usb2: Product: xHCI Host Controller
  523. [    1.739185] usb usb2: Manufacturer: Linux 6.17.7-aosc-main-16k xhci-hcd
  524. [    1.739187] usb usb2: SerialNumber: 0000:00:04.0
  525. [    1.739320] hub 2-0:1.0: USB hub found
  526. [    1.739333] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  527. [    1.739340] fbcon: Taking over console
  528. [    1.746677] Console: switching to colour frame buffer device 128x48
  529. [    1.754414] xhci_hcd 0000:00:19.0: xHCI Host Controller
  530. [    1.754767] xhci_hcd 0000:00:19.0: new USB bus registered, assigned bus number 3
  531. [    1.754979] xhci_hcd 0000:00:19.0: hcc params 0x0238fe6d hci version 0x110 quirks 0x0000000000000010
  532. [    1.755083] xhci_hcd 0000:00:19.0: xHCI Host Controller
  533. [    1.758763] xhci_hcd 0000:00:19.0: new USB bus registered, assigned bus number 4
  534. [    1.758768] xhci_hcd 0000:00:19.0: Host supports USB 3.0 SuperSpeed
  535. [    1.758841] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17
  536. [    1.758845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  537. [    1.758847] usb usb3: Product: xHCI Host Controller
  538. [    1.758849] usb usb3: Manufacturer: Linux 6.17.7-aosc-main-16k xhci-hcd
  539. [    1.758851] usb usb3: SerialNumber: 0000:00:19.0
  540. [    1.759818] hub 3-0:1.0: USB hub found
  541. [    1.759832] hub 3-0:1.0: 4 ports detected
  542. [    1.760023] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  543. [    1.760073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17
  544. [    1.760076] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  545. [    1.760078] usb usb4: Product: xHCI Host Controller
  546. [    1.760080] usb usb4: Manufacturer: Linux 6.17.7-aosc-main-16k xhci-hcd
  547. [    1.760082] usb usb4: SerialNumber: 0000:00:19.0
  548. [    1.760815] hub 4-0:1.0: USB hub found
  549. [    1.760829] hub 4-0:1.0: 4 ports detected
  550. [    1.761064] usbcore: registered new interface driver usblp
  551. [    1.761169] usbcore: registered new interface driver uas
  552. [    1.761197] usbcore: registered new interface driver usb-storage
  553. [    1.761212] usbcore: registered new interface driver ums-alauda
  554. [    1.761231] usbcore: registered new interface driver ums-cypress
  555. [    1.761246] usbcore: registered new interface driver ums-datafab
  556. [    1.761267] usbcore: registered new interface driver ums_eneub6250
  557. [    1.761280] usbcore: registered new interface driver ums-freecom
  558. [    1.761293] usbcore: registered new interface driver ums-isd200
  559. [    1.761307] usbcore: registered new interface driver ums-jumpshot
  560. [    1.761321] usbcore: registered new interface driver ums-karma
  561. [    1.761334] usbcore: registered new interface driver ums-onetouch
  562. [    1.761348] usbcore: registered new interface driver ums-realtek
  563. [    1.761361] usbcore: registered new interface driver ums-sddr09
  564. [    1.761374] usbcore: registered new interface driver ums-sddr55
  565. [    1.761387] usbcore: registered new interface driver ums-usbat
  566. [    1.761437] i8042: PNP: No PS/2 controller found.
  567. [    1.762115] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
  568. [    1.762130] device-mapper: uevent: version 1.0.3
  569. [    1.762241] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
  570. [    1.762358] device-mapper: multipath round-robin: version 1.2.0 loaded
  571. [    1.762364] device-mapper: multipath queue-length: version 0.2.0 loaded
  572. [    1.762369] device-mapper: multipath service-time: version 0.3.0 loaded
  573. [    1.762371] device-mapper: multipath historical-service-time: version 0.1.1 loaded
  574. [    1.762415] device-mapper: dm-log-userspace: version 1.3.0 loaded
  575. [    1.762489] hid: raw HID events driver (C) Jiri Kosina
  576. [    1.762542] usbcore: registered new interface driver usbhid
  577. [    1.762544] usbhid: USB HID core driver
  578. [    1.762546] Loongson Hwmon Enter...
  579. [    1.762580] Initial CPU temperature is 33000 (highest).
  580. [    1.762813] Initializing XFRM netlink socket
  581. [    1.762861] NET: Registered PF_INET6 protocol family
  582. [    1.763358] Segment Routing with IPv6
  583. [    1.763361] RPL Segment Routing with IPv6
  584. [    1.763375] In-situ OAM (IOAM) with IPv6
  585. [    1.763400] NET: Registered PF_PACKET protocol family
  586. [    1.763443] Key type dns_resolver registered
  587. [    1.764132] ACPI S3 supported with Loongson ACPI SADR extension
  588. [    1.768727] registered taskstats version 1
  589. [    1.769150] Loading compiled-in X.509 certificates
  590. [    1.769918] Loaded X.509 cert 'Build time autogenerated kernel key: 4fca9ee227b0ff6f78405f0cbb902680aa4b1a22'
  591. [    1.777787] Demotion targets for Node 0: null
  592. [    1.778044] Key type .fscrypt registered
  593. [    1.778047] Key type fscrypt-provisioning registered
  594. [    1.779080] Btrfs loaded, zoned=yes, fsverity=yes
  595. [    1.779121] Key type big_key registered
  596. [    1.789728] Key type encrypted registered
  597. [    1.789733] AppArmor: AppArmor sha256 policy hashing enabled
  598. [    1.789744] ima: No TPM chip found, activating TPM-bypass!
  599. [    1.789751] Loading compiled-in module X.509 certificates
  600. [    1.790379] Loaded X.509 cert 'Build time autogenerated kernel key: 4fca9ee227b0ff6f78405f0cbb902680aa4b1a22'
  601. [    1.790384] ima: Allocated hash algorithm: sha512
  602. [    1.790401] ima: No architecture policies found
  603. [    1.790426] evm: Initialising EVM extended attributes:
  604. [    1.790427] evm: security.selinux
  605. [    1.790429] evm: security.SMACK64
  606. [    1.790430] evm: security.SMACK64EXEC
  607. [    1.790432] evm: security.SMACK64TRANSMUTE
  608. [    1.790434] evm: security.SMACK64MMAP
  609. [    1.790435] evm: security.apparmor
  610. [    1.790437] evm: security.ima
  611. [    1.790438] evm: security.capability
  612. [    1.790440] evm: HMAC attrs: 0x1
  613. [    1.790693] netconsole: network logging started
  614. [    1.806091] clk: Disabling unused clocks
  615. [    1.806100] PM: genpd: Disabling unused power domains
  616. [    1.808525] Freeing unused kernel image (initmem) memory: 1600K
  617. [    1.808531] This architecture does not have kernel memory protection.
  618. [    1.808541] Run /init as init process
  619. [    1.808543]   with arguments:
  620. [    1.808545]     /init
  621. [    1.808546]     splash
  622. [    1.808548]   with environment:
  623. [    1.808549]     HOME=/
  624. [    1.808551]     TERM=linux
  625. [    1.813965] systemd[1]: System time advanced to built-in epoch: Wed 2025-12-03 03:39:58 UTC
  626. [    1.975762] usb 1-1: new full-speed USB device number 2 using xhci_hcd
  627. [    1.999760] usb 3-2: new low-speed USB device number 2 using xhci_hcd
  628. [    2.099584] usb 1-1: New USB device found, idVendor=0bda, idProduct=b85b, bcdDevice= 0.00
  629. [    2.099588] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  630. [    2.099591] usb 1-1: Product: Bluetooth Radio
  631. [    2.099593] usb 1-1: Manufacturer: Realtek
  632. [    2.099595] usb 1-1: SerialNumber: 00e04c000001
  633. [    2.127740] usb 3-2: New USB device found, idVendor=1a2c, idProduct=0e24, bcdDevice= 1.10
  634. [    2.127745] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  635. [    2.127747] usb 3-2: Product: USB Keyboard
  636. [    2.127749] usb 3-2: Manufacturer: SEM
  637. [    2.268759] usb 3-3: new low-speed USB device number 3 using xhci_hcd
  638. [    2.316005] systemd[1]: Successfully made /usr/ read-only.
  639. [    2.316995] systemd[1]: systemd 258.2 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR -IMA +IPE -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
  640. [    2.317005] systemd[1]: Detected architecture loongarch64.
  641. [    2.317008] systemd[1]: Running in initrd.
  642. [    2.317324] systemd[1]: Hostname set to <aosc-nuc>.
  643. [    2.400102] usb 3-3: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice=24.58
  644. [    2.400112] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  645. [    2.400114] usb 3-3: Product: Lenovo USB Optical Mouse
  646. [    2.400117] usb 3-3: Manufacturer: Elan
  647. [    2.404947] systemd[1]: Queued start job for default target initrd.target.
  648. [    2.418710] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  649. [    2.418810] systemd[1]: Expecting device dev-disk-by\x2duuid-0670ffaf\x2d1355\x2d445e\x2d86d4\x2d4ce11784ba66.device - /dev/disk/by-uuid/0670ffaf-1355-445e-86d4-4ce11784ba66...
  650. [    2.418826] systemd[1]: Expecting device dev-disk-by\x2duuid-F0AD\x2dF86F.device - /dev/disk/by-uuid/F0AD-F86F...
  651. [    2.418864] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
  652. [    2.418907] systemd[1]: Reached target slices.target - Slice Units.
  653. [    2.418936] systemd[1]: Reached target swap.target - Swaps.
  654. [    2.418959] systemd[1]: Reached target timers.target - Timer Units.
  655. [    2.419093] systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
  656. [    2.419230] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  657. [    2.419356] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
  658. [    2.419470] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  659. [    2.419549] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  660. [    2.419573] systemd[1]: Reached target sockets.target - Socket Units.
  661. [    2.420736] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  662. [    2.420784] systemd[1]: modprobe@dm_multipath.service - Load Kernel Module dm_multipath was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!dm_multipath).
  663. [    2.421714] systemd[1]: Starting multipathd.service - Device-Mapper Multipath Device Controller...
  664. [    2.423996] systemd[1]: Starting systemd-journald.service - Journal Service...
  665. [    2.425408] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  666. [    2.425479] systemd[1]: systemd-pcrphase-initrd.service - TPM PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  667. [    2.426856] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
  668. [    2.429205] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  669. [    2.430699] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
  670. [    2.437651] i2c_dev: i2c /dev entries driver
  671. [    2.438223] systemd[1]: Started multipathd.service - Device-Mapper Multipath Device Controller.
  672. [    2.446895] systemd-journald[183]: Collecting audit messages is disabled.
  673. [    2.448858] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
  674. [    2.450360] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
  675. [    2.452984] systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
  676. [    2.454305] systemd[1]: Starting dracut-cmdline-ask.service - dracut ask for additional cmdline parameters...
  677. [    2.455950] la_ow_syscall module successfully initialized
  678. [    2.457096] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  679. [    2.458598] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  680. [    2.466694] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
  681. [    2.466864] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
  682. [    2.466892] systemd[1]: Reached target local-fs.target - Local File Systems.
  683. [    2.474204] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
  684. [    2.476025] systemd[1]: Finished dracut-cmdline-ask.service - dracut ask for additional cmdline parameters.
  685. [    2.477469] systemd[1]: Starting dracut-cmdline.service - dracut cmdline hook...
  686. [    2.513501] systemd[1]: Started systemd-journald.service - Journal Service.
  687. [    2.614287] RPC: Registered named UNIX socket transport module.
  688. [    2.614295] RPC: Registered udp transport module.
  689. [    2.614297] RPC: Registered tcp transport module.
  690. [    2.614299] RPC: Registered tcp-with-tls transport module.
  691. [    2.614301] RPC: Registered tcp NFSv4.1 backchannel transport module.
  692. [    3.318552] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: renamed from eth0
  693. [    3.322896] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: renamed from eth1
  694. [    3.453573] ls2k3000_vpu: loading out-of-tree module taints kernel.
  695. [    3.517645] Decoder Base hw val 0x4041250000 len: 0x4000 irq: 85
  696. [    3.518210] Encoder Base hw val 0x4041254000 len: 0x4000 irq: 86
  697. [    3.520360] [drm] Initialized hantro 1.1.0 for 0000:00:06.3 on minor 1
  698. [    3.526619] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:19.0/usb3/3-2/3-2:1.0/0003:1A2C:0E24.0001/input/input1
  699. [    3.543937] Virtual CRAT table created for CPU
  700. [    3.544018] Topology: Add CPU node
  701. [    3.544115] [drm] loonggpu kernel modesetting enabled.
  702. [    3.565851] Console: switching to colour dummy device 80x25
  703. [    3.576960] hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:19.0-2/input0
  704. [    3.577405] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:19.0/usb3/3-2/3-2:1.1/0003:1A2C:0E24.0002/input/input2
  705. [    3.577937] [drm] initializing kernel modesetting (LG200 0x0014:0x7A35 0x0000:0x0000 0x10).
  706. [    3.577943] [drm] Set 2K3000 device in loonggpu driver
  707. [    3.577945] [drm] register mmio base: 0x4125C000
  708. [    3.577947] [drm] register mmio size: 256
  709. [    3.577949] [drm] loonggpu dc register mmio base: 0x41210000
  710. [    3.577951] [drm] loonggpu dc register mmio size: 65536
  711. [    3.577953] [drm] loonggpu dc io base: 0x8000000010010000
  712. [    3.628021] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:19.0/usb3/3-2/3-2:1.1/0003:1A2C:0E24.0002/input/input3
  713. [    3.628280] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:19.0-2/input1
  714. [    3.628644] input: Elan Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:19.0/usb3/3-3/3-3:1.0/0003:17EF:608D.0003/input/input4
  715. [    3.628879] hid-generic 0003:17EF:608D.0003: input,hidraw2: USB HID v1.11 Mouse [Elan Lenovo USB Optical Mouse] on usb-0000:00:19.0-3/input0
  716. [    3.657608] VPU: Reserve totol memory size: 1215 M
  717. [    3.658741] hantrovcmd: HW at base <0x4041250000> with ID <0x43421500>
  718. [    3.658813] vcmd_driver:create cmdbuf data when hw_version_id = 0x43421500
  719. [    3.792126] [drm] GPU Family: LG200 series LG200, Feature:0x00000000
  720. [    3.792133] [drm] Firmware Version: 1.0.0
  721. [    3.792143] [drm] aper_base 0x4000000000 SIZE 0x40000000 bytes
  722. [    3.792148] loonggpu 0000:00:06.0: Video RAM: 1024M 0x0000004000000000 - 0x000000403FFFFFFF (1024M used)
  723. [    3.792152] loonggpu 0000:00:06.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
  724. [    3.792383] [drm] loonggpu: 3072M of GTT memory ready.
  725. [    3.792400] [drm] GART: num cpu pages 65536, num gpu pages 65536
  726. [    3.792424] [drm] vm size is 1024 GB, 3 levels, block size is 11-bit
  727. [    3.793742] [drm] PCIE GART of 1024M enabled (table at 0x000000403FF80000).
  728. [    3.793869] [drm] ZIP META: num cpu pages 512, num gpu pages 512
  729. [    3.796856] [drm] LOONGGPU get vbios from vram Success
  730. [    3.796867] [drm] LOONGGPU vbios header info:
  731. [    3.796869] [drm] ver:2.1 links:2 max_planes:0 name:Loongson-VBIOS info:
  732. [    3.796871] [drm] oem-vendor:\xf0b oem-product:2022
  733. [    3.796873] [drm] LOONGGPU vbios crtc-0 max_frep:340000 width:4096 height:4096
  734. [    3.796876] [drm] LOONGGPU vbios crtc-1 max_frep:340000 width:4096 height:4096
  735. [    3.796878] [drm] The video memory and gpu information is not obtained from the vbios!
  736. [    3.796884] [drm] Encoder Parse: #0x04-dp feature:0 type:lvds hotplug:polling.
  737. [    3.796886] [drm] Encoder Parse: config_type:timing edid_method:encoder reset_gpio:0.
  738. [    3.796890] [drm] Encoder Parse: #0x02-hdmi feature:0 type:tmds hotplug:polling.
  739. [    3.796892] [drm] Encoder Parse: config_type:timing edid_method:i2c reset_gpio:0.
  740. [    3.796894] [drm] LOONGGPU Display Core initialized with v1.0!
  741. [    3.796896] [drm] LOONGGPU DC construct links:2
  742. [    3.796897] [drm] LOONGGPU DC construct links:2
  743. [    3.817022] [drm] PCIE ZIP META of 8M enabled (table at 0x000000403F000000).
  744. [    4.585789] [drm] [Bridge_phy] dp encoder-0 be attach to this bridge.
  745. [    4.585793] [drm] [Bridge_phy] dp init finish.
  746. [    4.585992] [drm] LOONGGPU DC init i2c 1 addr 0x50 finish
  747. [    4.586001] [drm] [Bridge_phy] hdmi encoder-1 be attach to this bridge.
  748. [    4.586003] [drm] [Bridge_phy] hdmi init finish.
  749. [    4.586087] [drm] LOONGGPU DC irq init sources number:13
  750. [    4.586090] [drm] LOONGGPU Display Crtcs
  751. [    4.586091] [drm] Crtc 0: name:crtc-0
  752. [    4.586093] [drm] Crtc 1: name:crtc-1
  753. [    4.586094] [drm] LOONGGPU Display Connectors
  754. [    4.586096] [drm] Connector 0: name:DP-1
  755. [    4.586098] [drm] Connector 1: name:HDMI-A-1
  756. [    4.586099] [drm] LOONGGPU Display Encoders
  757. [    4.586101] [drm] Encoder 0: name:TMDS-41
  758. [    4.586102] [drm] Encoder 1: name:TMDS-43
  759. [    4.590859] [drm] Config crtc number:2 meta addr 0x403fc00000
  760. [    4.703766] vcmd_driver: main module register 0:0x90012012
  761. [    4.703771] vcmd_driver: main module register 50:0x09510000
  762. [    4.703773] vcmd_driver: main module register 54:0x00820400
  763. [    4.703774] vcmd_driver: main module register 56:0x0800004a
  764. [    4.703776] vcmd_driver: main module register 309:0x80001ff9
  765. [    4.704711] hantrovcmd: HW at base <0x4041254000> with ID <0x43421500>
  766. [    4.704770] vcmd_driver:create cmdbuf data when hw_version_id = 0x43421500
  767. [    5.592860] kcd kcd: Allocated 4194304 bytes on gart
  768. [    5.592866] kcd kcd: CWSR trap disabled
  769. [    5.592868] kcd kcd: Total number of KCD nodes to be created: 1
  770. [    5.593003] kcd kcd: num of queues: 8
  771. [    5.593213] [drm] load kq base 0x00110c000 size = 0x200
  772. [    5.593230] Virtual CRAT table created for GPU
  773. [    5.593308] Topology: Add dGPU node [0x7a35:0x14]
  774. [    5.593311] kcd kcd: added device 14:7a35
  775. [    5.593785] [drm] Initialized loonggpu 1.0.0 for 0000:00:06.1 on minor 0
  776. [    5.659837] [drm] fb mappable at 0x403E000000
  777. [    5.659840] [drm] vram apper at 0x4000000000
  778. [    5.659842] [drm] size 9224192
  779. [    5.659843] [drm] fb depth is 24
  780. [    5.659845] [drm]    pitch is 7680
  781. [    5.659847] [drm] screen_base 0x800000403E000000
  782. [    5.659848] [drm] screen_size 0x8CC000
  783. [    5.659972] Console: switching to colour frame buffer device 240x75
  784. [    5.659981] loonggpu-dc 0000:00:06.1: [drm] fb0: loonggpudrmfb frame buffer device
  785. [    5.727765] vcmd_driver: main module register 0:0x90009100
  786. [    5.727769] vcmd_driver: main module register 80:0x98dfc200
  787. [    5.727771] vcmd_driver: main module register 214:0x48401000
  788. [    5.727772] vcmd_driver: main module register 226:0x8a19291
  789. [    5.727774] vcmd_driver: main module register 287:0x40a28000
  790. [    5.727775] vcmd_driver: main module register 509:0x2151
  791. [    5.727779] hantro 0000:00:06.3: Unbalanced pm_runtime_enable!
  792. [    5.727781] hantro device created
  793. [    5.760795] [drm] for pixclock = 164 mhz, found: multiplier = 92, tx_clkdiv = 3, tx_rate = 2, precision = 61 / 10000.
  794. [    5.760804] [drm] Warning: PIX clock precision degraded to 100 / 10000
  795. [    5.760806] [drm] [2K3000] PhyClk 1650 Mhz
  796. [    5.760808] [drm] [2K3000] Multiplier 92
  797. [    5.760809] [drm] [2K3000] TxClkDiv 3
  798. [    5.760811] [drm] [2K3000] TxRate 2
  799. [    5.760812] [drm] hdmi phy boot up done...
  800. [    5.771762] [drm] hdmi mpll config done......
  801. [    5.867123] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs
  802. [    5.867604] EXT4-fs (nvme0n1p2): mounted filesystem 0670ffaf-1355-445e-86d4-4ce11784ba66 ro with ordered data mode. Quota mode: none.
  803. [    6.084019] systemd-journald[183]: Received SIGTERM from PID 1 (systemd).
  804. [    6.174689] systemd[1]: System time advanced to timestamp on /var/lib/systemd/timesync/clock: Sat 2026-01-03 16:30:01 CST
  805. [    6.522554] systemd[1]: systemd 258.2 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR -IMA +IPE -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
  806. [    6.522565] systemd[1]: Detected architecture loongarch64.
  807. [    6.657735] systemd-sysv-generator[564]: SysV service '/etc/init.d/vga_check.sh' lacks a native systemd unit file, automatically generating a unit file for compatibility.
  808. [    6.657750] systemd-sysv-generator[564]: Please update package to include a native systemd unit file.
  809. [    6.657761] systemd-sysv-generator[564]: ! This compatibility logic is deprecated, expect removal soon. !
  810. [    7.194840] systemd[1]: initrd-switch-root.service: Deactivated successfully.
  811. [    7.195114] systemd[1]: Stopped initrd-switch-root.service - Switch Root.
  812. [    7.196390] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
  813. [    7.197136] systemd[1]: Created slice system-cups.slice - CUPS Slice.
  814. [    7.197715] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  815. [    7.198152] systemd[1]: Created slice user.slice - User and Session Slice.
  816. [    7.198204] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
  817. [    7.198290] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  818. [    7.198580] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
  819. [    7.198629] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-236d7677\x2df42a\x2da10d\x2d1bdf\x2d770def1dc0a0.device - /dev/disk/by-partuuid/236d7677-f42a-a10d-1bdf-770def1dc0a0...
  820. [    7.198675] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
  821. [    7.198720] systemd[1]: Reached target getty.target - Login Prompts.
  822. [    7.198769] systemd[1]: Reached target imports.target - Image Downloads.
  823. [    7.198813] systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
  824. [    7.198857] systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
  825. [    7.198896] systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
  826. [    7.198940] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  827. [    7.199002] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
  828. [    7.199052] systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
  829. [    7.199095] systemd[1]: Reached target remote-fs.target - Remote File Systems.
  830. [    7.199135] systemd[1]: Reached target remote-integritysetup.target - Remote Integrity Protected Volumes.
  831. [    7.199174] systemd[1]: Reached target remote-veritysetup.target - Remote Verity Protected Volumes.
  832. [    7.199215] systemd[1]: Reached target slices.target - Slice Units.
  833. [    7.199281] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  834. [    7.199435] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
  835. [    7.201107] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
  836. [    7.202762] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
  837. [    7.203859] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
  838. [    7.205508] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
  839. [    7.205791] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  840. [    7.205916] systemd[1]: Listening on systemd-mountfsd.socket - DDI File System Mounter Socket.
  841. [    7.206044] systemd[1]: Listening on systemd-nsresourced.socket - Namespace Resource Manager Socket.
  842. [    7.206119] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  843. [    7.206142] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  844. [    7.206250] systemd[1]: Listening on systemd-resolved-monitor.socket - Resolve Monitor Varlink Socket.
  845. [    7.206358] systemd[1]: Listening on systemd-resolved-varlink.socket - Resolve Service Varlink Socket.
  846. [    7.206481] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  847. [    7.206604] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
  848. [    7.206733] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
  849. [    7.208007] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
  850. [    7.208947] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  851. [    7.209934] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  852. [    7.211099] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  853. [    7.214014] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  854. [    7.229871] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  855. [    7.229961] systemd[1]: modprobe@configfs.service - Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs).
  856. [    7.230023] systemd[1]: modprobe@dm_mod.service - Load Kernel Module dm_mod was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!dm_mod).
  857. [    7.230069] systemd[1]: modprobe@drm.service - Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm).
  858. [    7.230114] systemd[1]: modprobe@efi_pstore.service - Load Kernel Module efi_pstore was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!efi_pstore).
  859. [    7.233407] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
  860. [    7.233517] systemd[1]: modprobe@loop.service - Load Kernel Module loop was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!loop).
  861. [    7.233603] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
  862. [    7.233665] systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
  863. [    7.233836] systemd[1]: systemd-boot-clear-sysfail.service - Clear SysFail Entry If The Boot Is Successful was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/LoaderEntrySysFail-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
  864. [    7.233906] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
  865. [    7.236786] systemd[1]: Starting systemd-journald.service - Journal Service...
  866. [    7.238883] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  867. [    7.240572] systemd[1]: Starting systemd-network-generator.service - Generate Network Units from Kernel Command Line...
  868. [    7.240669] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  869. [    7.242396] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  870. [    7.242621] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  871. [    7.242767] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  872. [    7.244639] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
  873. [    7.246401] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  874. [    7.251491] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
  875. [    7.252065] fuse: init (API version 7.44)
  876. [    7.252370] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  877. [    7.252709] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  878. [    7.253045] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  879. [    7.254511] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  880. [    7.255351] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  881. [    7.255955] systemd[1]: modprobe@fuse.service: Deactivated successfully.
  882. [    7.256277] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
  883. [    7.257046] systemd[1]: Finished systemd-network-generator.service - Generate Network Units from Kernel Command Line.
  884. [    7.259541] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  885. [    7.260945] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  886. [    7.262535] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
  887. [    7.264074] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
  888. [    7.264893] systemd-journald[579]: Collecting audit messages is enabled.
  889. [    7.269291] EXT4-fs (nvme0n1p2): re-mounted 0670ffaf-1355-445e-86d4-4ce11784ba66 r/w.
  890. [    7.269430] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  891. [    7.271391] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
  892. [    7.273170] systemd[1]: Activating swap swapfile.swap - /swapfile...
  893. [    7.273284] systemd[1]: ostree-remount.service - OSTree Remount OS/ Bind Mounts was skipped because of an unmet condition check (ConditionKernelCommandLine=ostree).
  894. [    7.273565] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
  895. [    7.273628] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
  896. [    7.276848] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
  897. [    7.276946] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
  898. [    7.277215] systemd[1]: Started systemd-journald.service - Journal Service.
  899. [    7.293913] Adding 16777200k swap on /swapfile.  Priority:-2 extents:10 across:17833968k SS
  900. [    7.295456] audit: type=1334 audit(1767429002.996:2): prog-id=14 op=LOAD
  901. [    7.297690] audit: type=1334 audit(1767429002.998:3): prog-id=15 op=LOAD
  902. [    7.305218] systemd-journald[579]: Received client request to flush runtime journal.
  903. [    7.309918] audit: type=1334 audit(1767429003.011:4): prog-id=16 op=LOAD
  904. [    7.310016] audit: type=1334 audit(1767429003.011:5): prog-id=17 op=LOAD
  905. [    7.310113] audit: type=1334 audit(1767429003.011:6): prog-id=18 op=LOAD
  906. [    7.313136] systemd-journald[579]: /var/log/journal/16520bb47aca4fbeb5f30ca6afb4ffee/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
  907. [    7.313146] systemd-journald[579]: Rotating system journal.
  908. [    7.320959] tun: Universal TUN/TAP device driver, 1.6
  909. [    7.321505] audit: type=1334 audit(1767429003.022:7): prog-id=6 op=UNLOAD
  910. [    7.321520] audit: type=1334 audit(1767429003.022:8): prog-id=5 op=UNLOAD
  911. [    7.321901] audit: type=1334 audit(1767429003.023:9): prog-id=19 op=LOAD
  912. [    7.321970] audit: type=1334 audit(1767429003.023:10): prog-id=20 op=LOAD
  913. [    7.325048] audit: type=1334 audit(1767429003.026:11): prog-id=21 op=LOAD
  914. [    8.061089] mousedev: PS/2 mouse device common for all mice
  915. [    8.068111] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  916. [    8.081326] rtc rtc0: invalid alarm value: 1966-06-01T02:02:53
  917. [    8.083398] loongson-rtc LOON0001:00: registered as rtc0
  918. [    8.084063] loongson-rtc LOON0001:00: setting system clock to 2026-01-10T02:34:01 UTC (1768012441)
  919. [    8.141989] loongson-spi-pci 0000:00:16.0: can't derive routing for PCI INT A
  920. [    8.142004] loongson-spi-pci 0000:00:16.0: PCI INT A: no GSI
  921. [    8.151230] loongson3_cpufreq loongson3_cpufreq: probe with driver loongson3_cpufreq failed with error -1
  922. [    8.154882] rtc-efi rtc-efi.0: registered as rtc1
  923. [    8.159096] snd_hda_intel 0000:00:06.2: Force to snoop mode by module option
  924. [    8.159410] snd_hda_intel 0000:00:07.0: Force to snoop mode by module option
  925. [    8.159943] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  926. [    8.160297] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  927. [    8.160489] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  928. [    8.205712] Bluetooth: Core ver 2.22
  929. [    8.205771] NET: Registered PF_BLUETOOTH protocol family
  930. [    8.205776] Bluetooth: HCI device and connection manager initialized
  931. [    8.205786] Bluetooth: HCI socket layer initialized
  932. [    8.205792] Bluetooth: L2CAP socket layer initialized
  933. [    8.205801] Bluetooth: SCO socket layer initialized
  934. [    8.210747] snd_hda_codec_conexant hdaudioC1D0: SN6140: BIOS auto-probing.
  935. [    8.211269] snd_hda_codec_conexant hdaudioC1D0: autoconfig for SN6140: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:hp
  936. [    8.211274] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  937. [    8.211277] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  938. [    8.211279] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
  939. [    8.211282] snd_hda_codec_conexant hdaudioC1D0:    inputs:
  940. [    8.211284] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
  941. [    8.211287] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
  942. [    8.237215] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card1/input6
  943. [    8.238423] input: HDA Loongson Mic as /devices/pci0000:00/0000:00:07.0/sound/card1/input7
  944. [    8.240324] input: HDA Loongson Headphone as /devices/pci0000:00/0000:00:07.0/sound/card1/input8
  945. [    8.247010] input: HDA Loongson HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:06.2/sound/card0/input5
  946. [    8.252958] input: HDA Loongson HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:06.2/sound/card0/input9
  947. [    8.254338] usbcore: registered new interface driver btusb
  948. [    8.259365] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
  949. [    8.261390] Bluetooth: hci0: RTL: rom_version status=0 version=1
  950. [    8.261409] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
  951. [    8.267092] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  952. [    8.270120] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
  953. [    8.273466] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
  954. [    8.309080] rtw89_8852be 0000:04:00.0: loaded firmware rtw89/rtw8852b_fw-1.bin
  955. [    8.319725] rtw89_8852be 0000:04:00.0: Firmware version 0.29.128.0 (418a672d), cmd version 0, type 5
  956. [    8.319744] rtw89_8852be 0000:04:00.0: Firmware version 0.29.128.0 (418a672d), cmd version 0, type 3
  957. [    8.480467] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  958. [    8.480477] Bluetooth: BNEP filters: protocol multicast
  959. [    8.480484] Bluetooth: BNEP socket layer initialized
  960. [    8.483075] nvme nvme0: using unchecked data buffer
  961. [    8.608716] rtw89_8852be 0000:04:00.0: chip rfe_type is 1
  962. [    8.637423] ACPI: \: failed to evaluate _DSM e8c3a8d2-694b-004f-82bd-fe8607803aa7 rev:0 func:10 (0x1001)
  963. [    8.637437] ACPI: \: failed to evaluate _DSM e8c3a8d2-694b-004f-82bd-fe8607803aa7 rev:0 func:6 (0x1001)
  964. [    8.638125] rtw89_8852be 0000:04:00.0: rfkill hardware state changed to enable
  965. [    8.792345] Bluetooth: hci0: RTL: fw version 0x098b154b
  966. [    8.888582] NET: Registered PF_QIPCRTR protocol family
  967. [    8.925343] Bluetooth: hci0: AOSP extensions version v1.00
  968. [    8.925510] Bluetooth: MGMT ver 1.23
  969. [    8.942261] Bluetooth: RFCOMM TTY layer initialized
  970. [    8.942281] Bluetooth: RFCOMM socket layer initialized
  971. [    8.942287] Bluetooth: RFCOMM ver 1.11
  972. [   10.763364] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: Register MEM_TYPE_PAGE_POOL RxQ-0
  973. [   10.765187] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: Register MEM_TYPE_PAGE_POOL RxQ-1
  974. [   10.766860] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: Register MEM_TYPE_PAGE_POOL RxQ-2
  975. [   10.768475] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: Register MEM_TYPE_PAGE_POOL RxQ-3
  976. [   10.771580] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: PHY [stmmac-18:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
  977. [   10.784446] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: No Safety Features support found
  978. [   10.784458] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: IEEE 1588-2008 Advanced Timestamp supported
  979. [   10.784598] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: registered PTP clock
  980. [   10.786382] dwmac-loongson-pci 0000:00:03.0 enp0s3f0: configuring for phy/rgmii-id link mode
  981. [   10.790557] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: Register MEM_TYPE_PAGE_POOL RxQ-0
  982. [   10.792212] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: Register MEM_TYPE_PAGE_POOL RxQ-1
  983. [   10.793872] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: Register MEM_TYPE_PAGE_POOL RxQ-2
  984. [   10.795538] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: Register MEM_TYPE_PAGE_POOL RxQ-3
  985. [   10.799659] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: PHY [stmmac-19:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
  986. [   10.812544] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: No Safety Features support found
  987. [   10.812556] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: IEEE 1588-2008 Advanced Timestamp supported
  988. [   10.812664] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: registered PTP clock
  989. [   10.815282] dwmac-loongson-pci 0000:00:03.1 enp0s3f1: configuring for phy/rgmii-id link mode
  990. [   12.751225] kauditd_printk_skb: 60 callbacks suppressed
  991. [   12.751232] audit: type=1006 audit(1768012446.166:41): pid=1036 uid=0 subj=unconfined old-auid=4294967295 auid=982 tty=(none) old-ses=4294967295 ses=1 res=1
  992. [   12.751246] audit: type=1300 audit(1768012446.166:41): arch=c0000102 syscall=64 success=yes exit=3 a0=9 a1=7ffbb34010 a2=3 a3=0 items=0 ppid=1 pid=1036 auid=982 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" subj=unconfined key=(null)
  993. [   12.751252] audit: type=1327 audit(1768012446.166:41): proctitle="(systemd)"
  994. [   40.739813] audit: type=1334 audit(1768012474.155:42): prog-id=32 op=UNLOAD
  995. [   54.600715] audit: type=1006 audit(1768012488.015:43): pid=1086 uid=0 subj=unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
  996. [   54.600747] audit: type=1300 audit(1768012488.015:43): arch=c0000102 syscall=64 success=yes exit=4 a0=d a1=7ffbb57da0 a2=4 a3=0 items=0 ppid=1024 pid=1086 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="sddm-helper" exe="/usr/lib/sddm/sddm-helper" subj=unconfined key=(null)
  997. [   54.600775] audit: type=1327 audit(1768012488.015:43): proctitle=2F7573722F6C69622F7364646D2F7364646D2D68656C706572002D2D736F636B6574002F746D702F7364646D2D617574682D38633138663165632D373533362D343130322D626530392D636631316634336138613535002D2D69640031002D2D7374617274002F7573722F62696E2F7374617274706C61736D612D783131002D
  998. [   54.679609] audit: type=1006 audit(1768012488.094:44): pid=1107 uid=0 subj=unconfined old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
  999. [   54.679624] audit: type=1300 audit(1768012488.094:44): arch=c0000102 syscall=64 success=yes exit=4 a0=9 a1=7ffbc27070 a2=4 a3=0 items=0 ppid=1 pid=1107 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" subj=unconfined key=(null)
  1000. [   54.679629] audit: type=1327 audit(1768012488.094:44): proctitle="(systemd)"
  1001. [   57.529474] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
  1002. [   59.089769] wlan0: authenticate with 84:32:ea:43:0b:d7 (local address=c8:26:e2:7b:d9:a0)
  1003. [   59.089802] wlan0: send auth to 84:32:ea:43:0b:d7 (try 1/3)
  1004. [   59.092415] wlan0: authenticated
  1005. [   59.094815] wlan0: associate with 84:32:ea:43:0b:d7 (try 1/3)
  1006. [   59.097663] wlan0: RX AssocResp from 84:32:ea:43:0b:d7 (capab=0x1511 status=0 aid=2)
  1007. [   59.208230] wlan0: associated
  1008. [   59.208690] wlan0: Limiting TX power to 30 (33 - 3) dBm as advertised by 84:32:ea:43:0b:d7
  1009. [   59.310013] audit: type=1325 audit(1768012492.723:45): table=firewalld:7 family=1 entries=26 op=nft_register_rule pid=910 subj=unconfined comm="firewalld"
  1010. [   59.310067] audit: type=1300 audit(1768012492.723:45): arch=c0000102 syscall=211 success=yes exit=6268 a0=6 a1=7ffb912408 a2=0 a3=0 items=0 ppid=1 pid=910 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="firewalld" exe="/usr/bin/python3.10" subj=unconfined key=(null)
  1011. [   59.310076] audit: type=1327 audit(1768012492.723:45): proctitle=2F7573722F62696E2F707974686F6E33002F7573722F62696E2F6669726577616C6C64002D2D6E6F666F726B002D2D6E6F706964
  1012. [  827.063873] audit: type=1334 audit(1768013266.629:46): prog-id=36 op=LOAD
  1013. [  827.064135] audit: type=1334 audit(1768013266.629:47): prog-id=37 op=LOAD
  1014. [  827.064280] audit: type=1334 audit(1768013266.629:48): prog-id=38 op=LOAD
  1015. [  857.179538] audit: type=1334 audit(1768013296.759:49): prog-id=38 op=UNLOAD
  1016. [  857.179552] audit: type=1334 audit(1768013296.759:50): prog-id=37 op=UNLOAD
  1017. [  857.179557] audit: type=1334 audit(1768013296.759:51): prog-id=36 op=UNLOAD
复制代码
回复

举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|深圳中科云信息技术有限公司

GMT+8, 2026-1-11 06:46 , Processed in 0.028507 second(s), 20 queries .

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表