久久派新世界buildroot7寸屏幕触摸功能怎么实现

2664803068

用的Linux自带驱动，调试信息


[    3.597929] goodix-ts 0-0014: driver-send-cfg enabled
[    3.609950] goodix-ts 0-0014: auto-update enabled
[    3.625997] goodix-ts 0-0014: No pinctrl found
[    3.662838] goodix-ts 0-0014: Success request irq-gpio
[    3.690770] goodix-ts 0-0014: Success request rst-gpio
[    3.705931] goodix-ts 0-0014: Guitar reset
[    3.806435] goodix-ts 0-0014: I2C Addr is 14
[    3.818602] goodix-ts 0-0014: IC Version: 911_1060
[    3.831998] goodix-ts 0-0014: Failed get valid config data with sensor id 0
[    3.851995] goodix-ts 0-0014: No config data or error occurred in panel_init
[    3.880969] goodix-ts 0-0014: Ready to run update thread.
[    3.894149] goodix-ts 0-0014: Use slot report protocol
[    3.901195] goodix-ts 0-0014: Direct firmware load for goodix_firmware.bin failed with error -2
[    3.918179] input: goodix-ts as /devices/virtual/input/input0
[    3.929938] goodix-ts 0-0014: Failed get firmware:-2
[    3.938897] goodix-ts 0-0014: INT num 27, trigger type:2
[    3.946104] goodix-ts 0-0014: Failed get valied firmware data
[    3.962337] goodix-ts 0-0014: create proc entry gt9xx_config success
[    3.978054] goodix-ts 0-0014: Alloc memory size:1534.
[    3.993956] goodix-ts 0-0014: I2C function: without pre and end cmd!
Create proc entry success!
但是使用看proc下有中断但是中断次数不增加，hexdump看event0坐标信息也没有

Youth

是设备树配置的问题，看我帖子https://bbs.ctcisz.com/forum.php?mod=viewthread&tid=154